Close

423 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남드림ㅮ강남드림within강남드림드림레깅스룸강남드림레깅스룸horrid 드림레깅스룸ギ∑드림레깅스룸thorough"

  • Repurposing IDE-Cables (even for video!)

  • Briefly: 80-wire IDE cables are *great* for high-speed stuff... But the pinout is a bit more difficult than a straight-through 40-wire IDE cable, because the 80-wire cables have shielding (yay!) which is connected to specific pins designated as ground,...
  • Ideas to #PICTIL

  • I did really like the idea of #PICTIL. So I did some research on this and on this page I will just summarize ideas. (mostly because all this in a comment would be to much I think). First the idea of using the PIC16F527 which @Yann Guidon / YGDES suggested....
  • Supporters and Sponsors

  • Thanks go to all of you who supported this project!Sponsors:Paul van Trigt and his team of VOS Truckparts - http://www.vostruckparts.nl/Supporters:Is0-Mick@Jeroen vd Velden@SeppIf you want to support our project, please visit this page.- Back to project...
  • Quadcopter Rassberry Pi 2 Autopilot

  • RPI2 configuration.1.0 Image InstallationInstall PREEMPT_RT image into RPI2. Press HERE to open emlid download section. Use program such as Image Writer to install image to MicroSd card.Connect RPI2 using SSH. ( e.g putty, Bitvise Tunnelier or any ssh...
  • My 'paid' review on xrobots.co.uk

  • As a patron on patreon.com for James Brutons channel I paid enough to get mentioned in a video :D Actually the amount you have to pay is very low and I pay it for more than a year now - and not because I wanted to be featured! I actually deleted my comment...
  • Synth-related links

  • A lot of synth modules schematics by Ken Stone http://www.cgs.synth.net/modules/#cgs48Navs modular lab http://navsmodularlab.blogspot.deArduino audio input http://www.instructables.com/id/Arduino-Audio-Input/step8/Clipping-Indicator/Interface Arduino...
  • MEMTYPE testing

  • First test - 2016-01-24Today I plugged my #Memtype into my PC for the first time. Here I will write some words about the first impressions/ideas. This page will get updated when i am doing further tests.Positive Thinks:Worked out of the box (Win7)Nice...
  • A Visit To W6TRW

  • During a visit to the ham swap meet at Northrop Grumman in Redondo Beach. It's always on the last Saturday of the month, and until now I haven't been in LA on the last Saturday of the month. Because I went to Sparklecon last week, I was also able...
  • Installer les drivers nécessaires à Diamond sous Linux.

  • INSTALLATION DES DRIVERS USB NECESSAIRES A L'UTILISATION DE LATTICE DIAMOND SOUS LINUX UBUNTU 14MATERIEL:Device sur la carte MachXO2 Pico: LCMXO2-1200ZE-2MG132CES1104RH01PROBLEME:Au premier lancement de Diamond:Q: yoda@yoda-W253EU-SSD:~$ /usr/local/diamond/3.5_x64/bin/lin64/diamondR:yoda@yoda-W253EU-SSD:~$...
  • Iniciando con HUZZAH ESP8266 de Adafruit

  • Recientemente tuve la oportunidad (por fin) de hacerme de una tarjeta ESP8266 de la que tanto hablan. Como un maker que se inicio en la electrónica gracias a Arduino, siempre he tenido el "temor" o esa resistencia a tratar de usar otras tarjetas,...
  • nRF51822 development on the Mac

  • March 11, 2016It took a full day, but I now believe I have the the latest version (10) of Nordic's SDK working on my Mac.I mainly followed instructions here. Do read that page also, it has some tips, like running gdb, that I won't cover here. Some of...
  • SoCal Mechanical Keyboard Meetup

  • April 2 was the 3rd or 4th SoCal mechanical meetup at the Datamancer workshop in Montclair, California. Here are a few pictures:DatamancerDatamancer was kind enough to open up their workshop to the geekhack, deskthority, and /r/mechanicalkeyboard community....
  • SnapNsew Soft Circuit Kit

  • Makersbox created SnapNsew as an easy to assemble, low-cost microcontoller board with 2 input and 2 outputs:Snap the pieces apart and easily sew them into a soft circuit project or wire them into a project.MakersBox shared the board on OSH Park:The original...