Close

234 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워가격ｕ 쓰리아워가격earth강남쓰리아워강남쓰리아워쓰리아워enter 강남쓰리아워ぶЪ강남쓰리아워most"

  • PCB 3d printer
  • Hacker page     by malin_iulian
  • helloLets all put our heads together and make this true.I have sketched a few ideas on what this printer should do:-create traces        - this could be achieved with standard copper strands from electric cables - flexible enough...

  • SMT and Thru-Hole Desoldering
  • Hacker page     by Hackaday
  • [by Bill Herd]My introduction to electronic manufacturing was as a production technician at Pennsylvania Scale Company in Leola PA in the early 1980’s. I learned that to work on what I wanted to work on I had to get my assigned duties done by noon...

  • SparkFun Shipment Review
  • Hacker page     by CompuCat
  • I thought I might as well share my thoughts on some new stuff I got from SparkFun.First up: the 50 watt soldering station. Apart from the metal dome for the brass sponge in the iron holder being loose, it's a solid iron. Adjustable temperature, fine...

  • Satellite tracking
  • Hacker page     by Xylitol
  • I've tried to get some pictures of NOAA sats today, the conditions wasn't really good but anyway...Here is my setup, on a high point of my town.My talkie-walkie, is a Baofeng GT-3 MARK II, I'm using a 3.5mm stereo jack to 2.5mm stereo jack for recoding...

  • Maker Faire Berlin 2015
  • Hacker page     by davedarko
  • [UPDATE] print is done :) Check the bottom of this page.Still recovering from that weekend. My first maker faire, a "have to", because it was in Berlin, my hometown. Friday night I was meeting with @WooDWorkeR, @Sophi Kravitz, @Elliot Williams and @al1...

  • Repurposing IDE-Cables (even for video!)
  • Hacker page     by Eric Hertz
  • Briefly: 80-wire IDE cables are *great* for high-speed stuff... But the pinout is a bit more difficult than a straight-through 40-wire IDE cable, because the 80-wire cables have shielding (yay!) which is connected to specific pins designated as ground,...

  • PSU for Opamp Regen
  • Hacker page     by chipveres
  • Here is the power supply for the upcoming opamp regen. Three things are worth noting. 1. It is not necessary to use separate diode bridges for the positive and negative supplies. One will do, but I saw that after I built the board. 2. The power switch...

  • Installer les drivers nécessaires à Diamond sous Linux.
  • Hacker page     by euchcat
  • INSTALLATION DES DRIVERS USB NECESSAIRES A L'UTILISATION DE LATTICE DIAMOND SOUS LINUX UBUNTU 14MATERIEL:Device sur la carte MachXO2 Pico: LCMXO2-1200ZE-2MG132CES1104RH01PROBLEME:Au premier lancement de Diamond:Q: yoda@yoda-W253EU-SSD:~$ /usr/local/diamond/3.5_x64/bin/lin64/diamondR:yoda@yoda-W253EU-SSD:~$...

  • Iniciando con HUZZAH ESP8266 de Adafruit
  • Hacker page     by MrHofflich
  • Recientemente tuve la oportunidad (por fin) de hacerme de una tarjeta ESP8266 de la que tanto hablan. Como un maker que se inicio en la electrónica gracias a Arduino, siempre he tenido el "temor" o esa resistencia a tratar de usar otras tarjetas,...

  • Cheap Bench USB Microscope
  • Hacker page     by Pandaemonium
  • This is my first full post of a hack (nay, an innovation, says you the reader), I realize I will make mistakes in it's presentation but I will endeavor to clarify my future ominous basement doings more clearly based on the kind comments of the bored...

  • Teensy addressable LED shield
  • Hacker page     by oshpark
  • Charles Lakins created this shield for Teensy 3.x which can control addressable RGB LEDs (WS28xx):Hackaday.io: Teensy v3.1 – FrSky S.Port & WS28xx Led ShieldThe shield also enables data logging of Smart Port Sensors: FrSky S-Port telemetry library.Video...

  • Standoffs, Coil Forms & Test Probes
  • Hacker page     by chipveres
  • Standoff insulators, small coil forms, and test probes are all in stock at your local office supply. Just look for the cheap Bic pens with the clear plastic barrels.  Also, for some reason, drugstores insist on labeling coil dope "clear nail polish"....

  • CAN Bus simulator on the Raspberry Pi
  • Hacker page     by oshpark
  • Julien Vanier created this CAN bus simulator on the Raspberry Pi to help develop and test the Carloop open-source car adapter:CAN Simulatorused to transmit and receive messages simulating OBD-II communications and regular vehicle messagesThe simulator...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday