Close

19067 Results for "㉣ 피망바둑 ㈍ rka119.top ㅰ 그레잇게임 ㈖ 사설홀덤 ㆌ 포카치는법주소 ㉫ 노리팡바둑이 ㈔ 배터리사이트게임주소 ㈓ 텍사스홀덤추천 ㈚ 맞고게임추천"

  • DuoDeck Type
  • Details     from DuoDeck Type
  • Built into this device are the following: - Two fans, toggled via switch on top - Direct access to Arduino prototyping pins, exposed at the top of the shell - USB expansion with toggle switches - A cigarette lighter port, matching...

  • Pomodorino
  • Details     from Pomodorino
  • The device uses a ATTiny85 with a V-USB Bootloader that is Arduino compatible. Basically it is just a DigiSpark with an WS2812 LED strapped on top

  • Mondrian Inspired Work Table
  • Details     from Mondrian Inspired Work Table
  • After a search & rescue for the rogue scrap pieces hiding, we tossed them in a pile on the floor and started our game of analog Tetris.We decided to use an IKEA Expedit as the base which is about 15.5" x 60" and give it a roughly 36" x 60" top. I had...

  • Water temperature mk2
  • Details     from Water temperature mk2
  • The core of the probe is three 4xAA battery holders glued together. The top one have no battery connectors left but instead are used to attach the Feather and sensor. The two bottom battery holders are wired in parallel to the battery-port of the Feather.At...

  • Air Pressure Quadcopter
  • Details     from Air Pressure Quadcopter
  • This unique Quadcopter idea goes like this..Top Duct Air intake (Intake vents on top, Remote Control Module inside)Remote Control Module (Controls all motors and motor speeds inside unit)Fan 1 (Moving at high speed drawing air into the unit)Top Motion...

  • RC Battle Spinning Top
  • Details     from RC Battle Spinning Top
  • This is a spinning top design that uses a Hemispherical Gimbal drive system that has been minimised to fit inside of a hand held toy. The hemisphere will rotate with the outer body. The angular momentum of the spinning top will drive the hemisphere....

  • Nibbler Table Saw
  • Details     from Nibbler Table Saw
  • I saw this Hackaday Article based on this project and decided to build my own version for my kids.  I've made a couple changes from the design that was show in that project and wanted to share those along with my thoughts. Summary of Changes...

  • Simple, low-cost FMCW radar
  • Details     from Simple, low-cost FMCW radar
  • Frequency-modulated RF is generated by the Hittite HMC431 VCO at top left, at about 5.8-6.0 GHz, amplified by the HMC476 MMIC gain block at top left, and split in half by the Wilkinson divider at top center. Half the RF output from the divider is amplified...

  • BoardMicro
  • Details     from BoardMicro
  • BoardMicro is a hyper accessible AVR debugging platform. WIth this software package, users can access a full range of problem solving tools using either their browser or an Android phone. BoardMicro is built on top of the simavr software stack combined...

  • CNC Chip Remover Fan
  • Details     from CNC Chip Remover Fan
  • The final plan, if my tests succeed is the following:Have two different size Ikea Samla boxes. On the top of the shallower put an acrylic sheet (this one I've in my lab), and mount 6 (or 2x6) 120x120x38 24V Sunon Maglev fans. This ones together has higher...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday