Who We AreWe're a collective of all kinds of people who love to explore science, art, and technology. We love to push boundaries, test limits, take things apart and then put them back together again (they usually still work!). If you think this sounds...
Requirements To start and designing such product is to understand how Peercoin algorithm work : everything is well explained here https://university.peercoin.net and here https://www.peercoin.net/wallet to download wallet on your machine...
Aims:I don't want to buy an external phono stage, and everything is set up for one inside my amp, so lets build one. First to work out the spec.1. Must work with MM (Moving Magnet) cartridge turntables. These require the least amplification, so are easier...
I am going to be 3D printing a Qi Charging case for my phone. This is a pretty complicated project for something that involves 1 3D printed part, one component module, some wire, and some washers. 3D printing off of the bed using carefully designed support...
how this all works there are 4 main parts1.vixen 3 the lighting sequencing software 2.raspberry pi loaded with falcon pi player3. Arduino Nano with a ENC28J60 Ethernet Module (each Nano can control maximum of 240 pixels)4. a load of 12mm WS2811 LED...
This project will be an open source project once the schematics and code are cleaned up a lot. Right now everything is wonderful development mess :)20 Flexible Inputs (ADC, Digital, DAC) with individual selectable voltage ranges12 Bit ADC (SAR)Programmable...
This is an ongoing longterm project to create dual channel precision bench power supply 2x50W with ultra low output ripple, fully programmable and adjustable from PC. Output channels are independent or connected in series or parallel. It will contain...
The TinTTY hardware setup is simple: Arduino UnoTFT screen (1in x 1in ILI9163C), connected via SPIUSB Host Shield, connected via SPIcheap mini 2.4GHz wireless USB keyboard The input device, by its nature, cannot be too miniature, otherwise it becomes...
Robots are getting far more sophisticated, far more capable and all this, with less effort. The aim of this project was to learn ROS (Robot Operating System), the assembly of the materials, electronics and all the of the other components that make...
From the picture it looks almost done, but far from it! This was just a layout test. I need to redraw everything, make it smaller and find out the arrangement of the LEDs first. Some things have to be fixed in software, as the original layout for...
This movie illustrates the launch sequence of the model. After pushing the launch button, the crew arm swings back, pulling up the sway arm on threads. Next the crew walkway retracts. At T-8 seconds Neopixels light up the F5 engine plume tubes. At T-0...
Step 1: Test with Xenon and a relay. My old remote to garage was broken. So I made a small board with a relay. Then hook it up with a Xenon from Particle. However the Xenon by default is used for Mesh network. So I have to flashed a UF2 bootloader to...
I bought an 800XL machine with 1050 disk drive in 1985, when they were being sold off cheap. At last I had a machine I could save software on reliably, and keep me amused between graduating and getting a job. My friend had lots of software for it....
There are four main components:1. The control board (that I'm making myself)2. A Tamiya tank chassis and gearbox3. A raspberry Pi with web server and fcgi API1. The control boardGoing on Version 7 (Minified3).MCU used is AT32UC3L0.Using separate battery...
Motivation:This is one of those projects that came into existence just to see if it could be done. This won't save you any money, but looks super cool at LAN parties if you match the color of your 3D printer filament to the PSU ATX extension cables...