Close

8866 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸₩셔츠룸ⓤsilverⓞ"

  • Infrasound Monitoring System

  • Real Infrasound Research on a budget I have been working on a new geophysics project for the past two years, a compact infrasound monitor based on a digital, i2c enabled differential pressure sensor. Very open-ended with lots of opportunities for students...
  • Elektronika 7-06 clock replica

  • Okay here's the specs:Dimensions: same as the original, measured from photos.Display: LEDs for every dot (found one one that light up in the exact same color as the phosphors in the original VFDs). That's 266 LEDs. LEDs shall be housed in a plastic matrix...
  • LiDAR as an input device

  • What I need is a system for interacting with a floor projection, both on and just outside of the projection area. There are ready-to-go systems that can do this to some degree. These are often fancy ceiling mounted devices with an IR camera that can...
  • Repairs for our FTC robot

  • Further modifications: We will continue to design and print 3D replacements for our robot, because things always break on our robot.We will try to improve our 3D models for the phone support, for the end caps, and for the strain reliefs to provide better...
  • A better Bluetooth Speaker

  • Here's the quick once-over for some project details:Inputs:-Bluetooth audio input, capable of AAC and Apt-X transport if possible-SPDIF input, stereo, 28kHz 24-bit-3.5mm jackOutputs:2 tweeters, stereo2 woofers, paired together (mono)Why the two woofers...
  • Einstein-Rosen Bridge (WiFi)

  • I have build two Raspberry Pi based boxes that connect to each other via WiFi on Channel 1 (2.4GHz) since no other WiFI AP in the area is using that channel, so I get a nice high-speed uncongested link.The WiFI dongle on my end is in AP mode, serving...
  • Open Source Modular Test Bench

  • To start with, this project would require an enclosure to hold the main control board, backplane, and all associated daughter boards/modules. This could be done like the PXI chassis or it could be set up where every module is in it's own case (for instance...
  • Hardly-a-Hack DPS Housing

  • On a whim I picked up a 20 cu in carlon old-work box and shoved a DPS3005 power supply module into it... to my suprise it fit! The DPS unit has springy plastic retention tabs that hold it snugly in the box, and I saw that there was still space at the...
  • breakout game on PIC12F1572

  • You may think that your modern TV doesn't accept NTSC signal and you are probably wrong. Check for YPbPr  input at the back. The green connector is probably also an NTSC composite input. It is the case with my 3 years old RCA TV and was the case...