fastLOGIC! open-source (industrial) logic controller An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions. FastLOGIC! is designed to cater to the automation...
deepfriedneon It is a high-frequency air-core transformer that produces high-voltage, low-current, and high-frequency alternating-current electricity. In general, Tesla coils can be divided into two groups, Spark Gap, and Solid State Tesla Coils....
AD9851 controlled by a STM32F103C8, delivers the requested frequency calibrated vs a GPS time baseThe requested frequency is the delivered frequency. High precision frequency: continuously calibrated against GPS time base Adjustable from 1Hz to 25MHz....
open the concept model : m1.scad in openscadexport to stl parts you need to be printedrotate the recipe enough to start the loopstop it before it breakregister and share the movie or adapt the concept to your need : for example you need to clean water...
I already own a basic WISA system.How to set it up, in a nutshell: It connects to your TV via HDMI Arc, plug in the usb power. That's it!The workhorse, in my eyes, is the transmitter. You can buy them anywhere, even on Amazon as a single device,...
For the radiation detector I’m working on I had to do my first analog design. I knew it wouldn’t be very straight-forward and I’d be going back and forth between simulations in PSpice for TI and trying out circuit prototypes. The detector analog front-end...
Project Title: Seamless Connectivity with Hotspot 2.0 on OpenWRTDescription: Welcome to the forefront of Wi-Fi connectivity revolution! Dive into the realm of Hotspot 2.0 on OpenWRT, where seamless and secure Wi-Fi roaming awaits. This project aims to...
I wanted to open/close my garage door programatically, so I picked up the cheapest Genie garage remote I could find thinking I would desolder the pushbutton and replace it with a programmatic switch. To avoid the battery draining, I thought I could...
I started this salvage project to produce a 32000-series cross-assembler that could be compiled to run on my Linux PC, and indeed any machine with a C compiler. Re-typing listings is very tedious, but one can use OCR to do much of the work. It is still...
Hi. So this is the story: My interest/knowledge of embedded stuff was always around 32bit MCUs and a little bit of FPGA/CPLD devices. Mostly in audio signal processing world. The embedded Linux always was for me something out of my scope. Back in the...
Introduction An energy saving system for cutting electrical energy in machines is a fundamental piece not only to reduce operational costs, but also to promote sustainable and efficient practices in the most diverse industrial sectors. This system is...
The software visualizes the bouncing of your switches on your Serial Monitor. It appears that bouncing is happening in microseconds instead of milliseconds. Push buttons generally perform better than toggle switches, in that sense that they provide a...
This project is prototype-complete and functions as intended. The code is good and so is the circuitry, and so not likely to change. The graphics and text on the board MIGHT change a bit. The BOM needs to be updated. The whole project is in Github. Enjoy!...
Introduction: Your home is your castle, and what’s better than a fully automatic castle? Nothing! That’s why we’re inviting you to submit your sweetest home automation hacks for a chance to win one of three $150 DigiKey shopping sprees. We love playing...