Can be upgraded to the Atmega328P of course, but the main goal was to have an Atmega8 DIP feather, mostly to trigger people, but the idea grew on me. Also: everyone probably has a DIP Atmega8 laying around somewhere, doing nothing - this board will...
The Feather Wing powers both the LEDs and the Adafruit Feather Huzzah (there is a 5V regulator on the back), so there is no need to split the power supply for both boards. You'll need to use a 9V/12V and 2A source. Also, the blue & red LEDs can be individually...
with the following features: - 2.8 inch resistive touch- compatible to Adafruit feather standard- socket for one feather, Thing plus board- integrated 5V power supply- beeper- breadboard area- wallmount enclosure Can be used with RP2040 based boards...
This is a Feather "Wing" which can be added to any feather board. It works by sending AT commands over the RX/TX pins that are on D0/D1 of the feather board. The NBIoT wing also has an optional USB port that allows it to be used as a stand-alone serial...
As the Adafruit Feather form factor of development boards is getting more and more popular, there are more and more interesting Feathers I would like to try to make a game console with. NRF54, ESP32S2, Giant Board, Orange Crab — to only mention a few...
This is a GPS shield for a Feather board. It uses the SAM-M8Q GPS module from U-blox. It is designed to be place directly onto a Feather board and use the UART or I2C lines of the Feather to communicate. No external antenna is required, as there is one...
For the "Take Flight with Feather" contest I am submitting my idea for this featherwing. It is a feather add-on board that has an AM2320 sensor for monitoring temperature and humidity. Also there is a photo/light senser to monitor light level. Additionally...
Using a Feather USB Host and Featherwing and loading a HID remapper to create typewriter sound effects for the most nostalgic typing you have ever experienced on a membrane keyboard.
This is the start of a more safe and reliable remote mainly for electric skateboards. Using 3 hall sensors for calculating an more accurate position. With BL5 it can be used 100m away and connect up to 20 clients. Follow setupguide on adafruit:https://learn.adafruit.com/bluefruit-nrf52-feather-learning-guide?view=all#arduino-bsp-setup...
I wanted to use an Adafruit AMG8833 thermal camera feather wing with the mini color TFT feather wing. Stacking them together with a Feather doubler board works fine (and the AMG8833 data looks very nice on the tiny screen!) but the problem...
The Challenge/Problem When experimenting with low power, mesh networked IoT nodes outdoors there a bunch of power features that would make it easier to quickly prototype and deploy these nodes. Solar power input. 18650 battery. Zero drain battery...