Install and setup Raspbian on your Raspberry Pi http://downloads.raspberrypi.org/raspbian_latest.t...Insert your SD Card, plug in a monitor/keyboard, and boot up
Download the thingbox.io image to the sd-card and boot the Pi. If you're using a direct connection you'll have to enable SPI and install the drivers - instructions here.
Uploading the program - this is the final version that plays all sounds then restartsLibrary files are from here https://github.com/TMRh20/TMRpcm/wikiNote WAV files are 8bit and should be less than 20K/sec samples - I used Audacity PortableThis...
Build your own RISC-V Computer with a Zybo or ZedBoardHow it worksBoth the ZedBoard and the Zybo board contain Xilinx Zynq chips with an ARM processor tied to some programmable logic. We'll use the ARM core to bootstrap the RISC-V Rocket Core that we'll...
Here is a rough overview of what i did to get it al working, some steps are more detailed than others, i will try to share as much as i can.1. Download the porta pi image (google it), this is a pre-configured pack of retropie and emulationstation and...
Step 5: Load Sound Files On The mp3 ModuleNow we can set up our circuit. The first step is to load a sound file onto your mp3 player. This is the sound that will play when your light sensor triggers the threshold. To do this, eject the SD card (the small...
Step 5: Load Sound Files On The mp3 ModuleNow we can set up our circuit. The first step is to load a sound file onto your mp3 player. This is the sound that will play when your light sensor triggers the threshold. To do this, eject the SD card (the small...
Copy all files from the SD Card folder onto the SD Card.If you want to add another game to the device, then drag it onto "FileListAdd.exe" on the SD Card, and it will be added to the file list stored on "flist.bin".
When you got all the components you need to count the number of pins that will be used to connect to the Trinket Pro, in order to let it work correctly. If you exceed the number of pins in a project you need to erase some shield and sensors from the...
Initializing the Bus PirateWith BP hardware version 3.b and firmware version 6.1, the default SPI mode parameters are all that's required to speak with the SD card. Following a BP reset or power up, the following is sufficient to set up the BP:HiZ>m...