3995 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

J1772 Hydra
Instructions from J1772 Hydra
For the EVSE variant only, construct the GFI coil assembly next. Skip this step for the Splitter variant. Place each GFI coil on the table, so that the coil wires are both at the top and both wires are exiting straight up. Take the left wire of each...

wireless microphone digital
Instructions from wireless microphone digital
now using 2 x hacked lyrat 4.3 boards ( removed SD card sockets ) 2 x SX1276 modulesESP-IDF IDEESP-ADF IDEHistoric Record....1st attempt worked but was for 2.4ghzI used the Wireless Audio Module / MD85XXP1 that can be found here http://www.raytac.com/products.php?subid=18...

Affordable Reflectance Transformation Imaging Dome
Instructions from Affordable Reflectance Transformation Imaging Dome
Next step is to connect the drains of the MOSFETs (their center leads) to the central 8-pin connector; there will ultimately be a header that plugs into this connector, wiring up the connection to the LEDs.So I'm writing this after finishing all the...

DIY RaspCade
Instructions from DIY RaspCade
3. DisplayThe screenThe screen we are using was part of a now discontinued case for the Raspberry Pi called the Qubit. It is a 7-inch IPS screen with a maximum resolution of 1024 x 600 and looks fantastic when up and running. If you are looking for the...

Norman, Coordinate
Instructions from Norman, Coordinate
Mount the LEDs Step 1: Go along the LED chain, marking one side of each LED.Be sure that all LEDs are marked on the same side. Step 2: Cut the LED string to make a pile of individual, LEDs, each with a mark. Step 3: Thread the LEDs onto the proto board,...

Forward array
Instructions from PiTagErrUs
The forward array is the "business end" of the tagger. It is the most complex part with the tightest tolerances. A lot of work went into making this piece work. Plus, I like the way it looks. Since I started this project I knew this piece would always...

Lets do it
Instructions from Setup & Update the ESP8266 - Getting Started Guide
For communication to the module we are using Arduino IDE, it's simple and it has a Serial monitor. We first need to install the ESP board so the software recognizes our board (If you have not already installed Arduino IDE you can go HERE and install...

How To Setup RIFD on Raspberry Pi using Microsoft IOT Core
Instructions from RFID on Raspberry Pi
In this Tutorial from Hobbyware.org I will show you how to how to setup an RFID Reader on Windows IOT Core, from start to finish. Some of the things we will go over will be: Products to Purchase, Hooking up the RFID and Installing the OS, the code, and...

A multithreaded blinking theremin powered by VIPER
Instructions from A multithreaded blinking theremin powered by VIPER
Explaining the codeWhy using VIPEROne of the concepts many people find challenging when beginning to write code for microcontrollers is how to manage multiple hardware-related tasks, seemingly all running at the same time. Designers are consequently...

I2C Communication
Instructions from ESP8266 Lua Tutorial, Part 2
In the details section of this project you will find a detailed analysis of the I2C bus and how it works, both electrically and in software. Make sure you read this before proceeding, so you understand what the code is doing. We're going to use the NodeMCU...

See what your going to make and the things you'll need:
Instructions from GeoLeaf
For those of you who prefer to watch something instead of reading I have created a detailed tutorial video. Don't worry though, everything in the video (and a little more) is all explained in this guide. Though, even if you will read through this guide...

Affordable Reflectance Transformation Imaging Dome
Instructions from Affordable Reflectance Transformation Imaging Dome
Here’s the camera holder from the previous step:Small, neat, secure, easy to install – perfect for the right camera. What is the right camera? It needs to be a reasonably small camera that will lay flat/parallel on the wooden board when you insert the...

Choosing Components
Instructions from Binary Wrist Watch
There are four main parts of the circuit board. We have the atmega328p microprocessor. This is the same as is found in popular arduino models. This is the brain and will communicate with a real time clock (RTC) module, process the time, and display...

Parts Selection and Ordering
Instructions from Generative kAiboard
Parts Selection I would say in general there are four categories of parts that you need to manage where some are customizable ordering-wise while others are fixed. The PCBsThe Electronics BOMThe Miscellaneous BOMThe Housing The PCBs Honestly the...

Digital to Analog Converter (DAC)
Instructions from Audio VU Meters & Raspberry Pi
With PWM we face some strong limitations: if we use software PWM we can use any GPIO pin, but get a lot of jitter. If we use hardware PWM we are limited to very few pins and two channels, but get almost no jitter. This is were the DAC comes in. It let's...

|<
<
1
2
3
4
5
>
>|