3995 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

Wearable computer
Instructions from Wearable computer
On the board containing the USB-like connector, on the edge opposite the connector whose wires you have resoldered, fold a piece of velcro. Connect the connector and then position a piece of velcro of the opposite type on top of your mask based on where...

Wearable computer
Instructions from Wearable computer
Disassemble the primary unit of the video glasses, which now resembles a black plastic bar. You should end up with two boards connected by a thin-film ribbon cable, one of which is connected to another board (containing a USB-like plug) connected by...

Solid-state garduino with RTC & LCD!
Instructions from Solid-state garduino with RTC & LCD!
(These are the areas I wing it.)Get a board slightly larger than the footprint of your fluorescent lamp.Layout your junction boxes approximately how you'd like them to sit.

CUBEX
Instructions from CUBEX
Download and build board files: https://github.com/arkorobotics/CUBEX_V1/tree/master/Board

CUBEX
Instructions from CUBEX
Order CUBEX BOM: https://github.com/arkorobotics/CUBEX_V1/blob/master/Board/BOM.xlsx

CUBEX
Instructions from CUBEX
Assemble the CUBEX Camera, Radio, and Solar Cell board.

CUBEX
Instructions from CUBEX
Powering the Motherboard, Camera, and Radio board using a power supply set to 3.3v, upload the code available at: https://github.com/arkorobotics/CUBEX_V1/tree/master/Code

CUBEX
Instructions from CUBEX
Finally, assemble CUBEX Power Board, LTC3536 section first, connect a power supply (set to 4.2v) to the battery input and measure the LTC3536 (buck-boost) output to assure the output is 3.3v. Then solder on the LTC3105 (solar charger) and solar cells...

FPGA development board
Instructions from FPGA development board
Board schematic is located at https://github.com/OH1TR/oh1tr-fpga-devboardI also have some code writen to this and it will be added soon.

Ultra Simple 2x4 Server Rack
Instructions from Ultra Simple 2x4 Server Rack
Have them cut the boards for you to these specs:Board #1 and 2: 20.75", then 20.75", then the remainder should be cut in half (will be 27.25" each, minus whatever is converted to sawdust)Board #3 and 4: Just saw these in half: 48" long.This will give...

CANPi
Instructions from CANPi
Get the components from your preferred supplier and solder the board.This is a list with all the needed components at Mouser:.http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=3BD03F3D2D

MIPI DSI Display Shield/HDMI Adapter
Instructions from MIPI DSI Display Shield/HDMI Adapter
Build the hardware:- Make/order the DSI Shield PCB.- Solder it!- Check the BOM, as not all components should be mounted.- Make/order/design an adapter board for your screen.- Connect the two boards together with the LCD. Power the system through USB.-...

MIPI DSI Display Shield/HDMI Adapter
Instructions from MIPI DSI Display Shield/HDMI Adapter
Power-cycle the board. A test screen with the panel info and "No HDMI signal" message should appear. If it doesn't... well, something's wrong. Otherwise, connect the HDMI input. If everything is OK, the PC should detect the display resolution and automatically...

Web based solar panel monitoring/managment
Instructions from Web based solar panel monitoring/managment
The project is just a typical bread board project. use what ever techniques your comfortable with. I use a mix of soldering for the voltage and current collectors and use wire wrap to tie those collectors back to the Arduino. One mistake I made that...

Smile Station
Instructions from Smile Station
On this next link is where I got the info for sending the photos taken with its own email account .http://mitchtech.net/connect-raspberry-pi-to-gmail...I tested it by copying the script to send attachments in to the python editor on the rpi by first...

|<
<
2
3
4
5
6
>
>|