Close

1979 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • LoFi
  • Instructions     from LoFi
  • Repeat steps 3-4 for any other LoFi boards you want. See the Read Me file in LoFi-PCB-Layouts for suggestions.

  • Animated Darth Vader build monitor
  • Instructions     from Animated Darth Vader build monitor
  • AAAARRRRRGGGGHHH! There's a confirmed but with editing project instructions that affects reordering. I've spent hours trying to get them straight and complete. I'll update once the bug is fixed, but for now you'll have to pretend you're watching Memento...Remove...

  • QubeCast Max
  • Instructions     from QubeCast Max
  • Parts Shopping!Get all the parts together that you'll need. This includes making the PCB.As the completed  radio board is designed to be in a stack with other boards, you need to think about the height of the connectors for the top and bottom of...

  • #Atmega_screen
  • Instructions     from #Atmega_screen
  • If you would like to make my project as it is you can order the PCB off of oshpark HERE the PCB is $17, All the gerbers and design files can be found on my github HERE too. The enclosure can be order off ebay HERE (not...

  • Lexitron RSS Reader
  • Instructions     from Lexitron RSS Reader
  • Tickernut construction log:Construction was completed in stages over the period of many months with a design that evolved to suit the available parts.  The progression of construction was arranged so that each stage could be completed and tested...

  • Infinity Mirror Clock
  • Instructions     from Infinity Mirror Clock
  • Electronics: A Standalone Arduino: http://dushyant.ahuja.ws/2013/10/standalone-arduin...OR Arduino mini pro: http://www.aliexpress.com/item/10Pcs-Lot-Pro-Mini-...RTC Module – DS1302: http://fabtolab.com/DS1302-RTC-module?search=rtcLM2596 Step Down Adjustable...

  • Data Collection Terminal
  • Instructions     from Data Collection Terminal
  • The project is mainly 0805 surface mount, the smallest parts are the FFC (Flat Flex Cable Connectors) which are 0.5mm, you will need to solder a 31 pin one for the GLCD and a 12 pin one for the barcode.If you open the cad files in your browser and look...

  • The Tinusaur
  • Instructions     from The Tinusaur
  • Just in case you don't know how to make the PCB yourself or where to buy all the components (please note that this is an open project - all info is freely available) you can check our page  at Tinusaur.StorEnvy.com where we have put some kits up...

  • Flex Modules
  • Instructions     from Flex Modules
  • Design your own PCB using Flex Modules as components or use our demo Flex Module projects.

  • Flex Modules
  • Instructions     from Flex Modules
  • Get supplies needed for etching flexible PCB. Copper clad Kapton/polyimide can be bought on eBay relatively easily. Sheet or roll will work fine. Our demos only require single sided.

  • JudgeTron 9001
  • Instructions     from JudgeTron 9001
  • Okay, what does a JudgeTron need? My idea was to use neural networks embedded in biological units to do the whole judging thing. These biological units unfortunately don't have native electrical interfaces: I couldn't just put a RJ45 into them and have...

  • The Curilights Controller
  • Instructions     from The Curilights Controller
  • Just some quick build notes:  The PCB layout was designed specifically to fit the Sparkfun WIG-08601 case.  I choose the knob (Sparkfun, COM-10001) because it's tall enough to extend past the top of the case from the PCB.The remaining issue...

  • OpenDerby
  • Instructions     from OpenDerby
  • Wire the RPi's GPIO to the start switch and finish line IR sensors. The start switch can be wired directly to the Pi's GPIO port. Each lane needs an IR photo resistor and NPN Transistor wired to the Pi's GPIO like this:I used RJ-45 jacks to connect the...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday