3515 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Attach the flange to the lid
Instructions from 3D printed cute barometer
Glue the lower half to the jar cap using an epoxy resin or some thick glue that won’t allow air to escape from the jar. If everything goes well, after you seal the jar, the air from the jar should only communicate to the lower half of the barometer enclosure....

Solarmodule preparation
Instructions from I<3T
Carefully put solar module on some soft underground so the front does not scratch. Then cut the long wire to around 50cm (see backside image as reference). Everything will be put in the back of the panel and there is plenty of room.

Graph Everything
Instructions from Particle Powered Air Quality Sensor
In the Google sheet you can create a header in the first row with all the labels. (See the screenshot above) You should notice by now that new data is showing up in the sheet (if you set everything up correctly). Go back to the previous steps if...

Cladding
Instructions from Capacitive Gamepad
Soak some brown paper in diluted glue and cover the face for aesthetics. Skip this step if you're not worried about looks. Alternately just paint everything when you're done, my experience suggests the touchpoints will work flawlessly through a coat...

Step 8: Assemble the Base and Cannon
Instructions from Arduino Bluetooth RC Tank
Carefully place everything in the case and close the lid. Use some glue to stick the cannon on the servo. Place a rubber duck or anything you want on it.

Checking all the Parts
Instructions from GPiA
Before doing anything with soldering and gluing I would test if everything works, so that includes the display, buttons or atleast the pads, and sound. You can do all that later but just checking for hardware faults is always going to save you some later...

Single Chip AVR BASIC Computer
Instructions from Single Chip AVR BASIC Computer
Completed PCB: Once I had all the components and had received the PCB, I assembled it and carried out some basic multimeter tests ensuring no short circuits were present (mainly ensuring no pins had shorts to the ground plane). No issues were present...

Install and test the PiPlanetFinder software
Instructions from Pi Planet Finder
Change to your home directory (probably /home/pi) and download the PiPlanetFinder software from GitHub:cd git clone https://github.com/DavidJBianco/PiPlanetFinder.gitThis will create a PiPlanetFinder subdirectory where all the files live.Now...

Check everything
Instructions from Rear view camera for electric wheelchair
Now that you have configured everything it is time to do a short check (before everyhting is more difficult to access).Reboot the raspberry. Connect to the WiFi if the raspberry with your mobile phone. Connect a streaming video client (e.g. VLC which...

take it apart and inspect it
Instructions from Dial-a-Memory
This is the interesting part. Two phones which have the same function, and look almost exactly the same on the outside can be engineered completely differently inside. Some have discrete components visible, some have everything hidden in...

Crazy Clock
Instructions from Crazy Clock
Carefully take stock of the interior of the movement. Some movements have most of the gears sitting on a tray that you can lift out away from the PCB and coil. The Quartex movement has everything encased in a plastic sub-chassis that can be removed as...

PiP: Raspberry Pi Portable Slate Computer
Instructions from PiP: Raspberry Pi Portable Slate Computer
Next is to solder the 3.5mm headphone jack to the Pi so it can be extended to the casing of the portable. Also solder your portable battery pack to the micro usb input for power on the RPi.(Running some tests and checking to make sure everything works...

NixieBot
Instructions from NixieBot
HousingOnce all the boards and PSU are assembled you should house the sockets in some way. Currently nixiebot just has the smartsocket boards on standoffs which are epoxied to a baseplate for a minimalist look. I do plan to make something more fitting...

Aeroponics Garden
Instructions from Aeroponics Garden
Fill the container with water, add some liquid fertilizer in there and place the fogger inside. Put the lid on and turn the fogger on (it should now get misty inside your container). If everything is done correctly you should now see fog appearing inside...

Hacking AngelCare® Breathing Sensor with Arduino
Instructions from Hacking AngelCare® Breathing Sensor with Arduino
The first thing to do is to get rid of the 1/8 jack that came with the sensorThen I put some soldering in the end of the cable so it can be easy to stick it in the protoboardConnect everything as the the Fritzing Diagram suggestDownload the Arduino Sketch...

|<
<
1
2
3
4
5
>
>|