183 Results for "%EA%B0%95%EB%82%A8%EB%A3%B8%EC%8B%B8%EB%A1%B1%2B%E3%80%8Eoio_%EF%BC%94%EF%BC%96%EF%BC%94%EF%BC%98_%EF%BC%90%EF%BC%99%EF%BC%93%EF%BC%90%E3%80%8F %EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%E2%89%AE%EA%B0%95%EB%82%A8%EB%9E%80%EC%A0%9C%EB%A6%AC%E2%88%80 %EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5 %E2%88%91%EC%84%A0%EB%A6%89%EC%9C%A0%ED%9D%A5%C2%B1 %EC%84%A0%EB%A6%89%EB%A3%B8%EC%8B%B8%EB%A1%B1%E2%88%86 %EA%B0%95%EB%82%A8%EB%A3%B8%E2%88%82 %EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%89%AE %EC%84%A0%EB%A6%89%EB%9E%80%EC%A0%9C%EB%A6%AC%E2%88%8F east"

Arduino or Wemos Code
Instructions from WiFi Signal Strength Scanner Monitor or Checker
In the arduino code set your WiFi credentials char wifissid[] = "ENTER YOUR WiFi SSID HERE"; char wifipass[] = "ENTER YOUR WiFi PASSWORD HERE"; Normally, the signal strength is displayed in dBm. But for a non techie person, the signal strength in terms...

Trying out GATTTOOL
Instructions from Reading a bunch of BLE sensors with raspberryZero
Now that i know how to access and decode the data lets try the Raspi GATTTOOL default BLE handler:Native to Debian and a lso to a bunch of linux distros or so i've heard of . First i reset the bluetooth of the raspi, just in case: sudo service bluetooth...

Manual SMT Pick and Place Machine
Instructions from Manual SMT Pick and Place Machine
The Arduino code is incredibly simple, with some strange looking oversampling for preventing the motors from vibrating:void sampling() //Oversample the slider readings to avoid motor vibration. { i=0; val =0; smallVal=0; while(i

Some notes
Instructions from Hydroponics Sensor
The ESP-32 board pins operate in 3.3v levels while the Gravity pH and EC sensors operate in 5V. I inserted a simple voltage divider to shift 5v to 3.3v levels on the signal pins.

Sugarcube - a tactile music controller
Instructions from Sugarcube - a tactile music controller
I attached a 2 axis gyroscope and 3 axis accelerometer onto this project so that I could add some interesting control to the device. The 5 degrees of freedom board from Sparkfun outputs data from its gyroscope and accelerometer as analog voltages. I...

rDUINOScope Boiana
Instructions from rDUINOScope Boiana
TEP 3 AssembleFor more detailed instructions, please visit the Project Website : http://rduinoscope.co.nf/rDUINO_step3.htmlNow is the time to create the Shield board. A Shield board is a board with pinouts which you stack on top of the ArduinoDUE board.Some...

Assemble the Four Adafruit Trellis Modules
Instructions from Kord Kontroller
Solder up the four Adafruit Trellis modules. If desired, add LEDs to the top side of the board. The orientation for the LEDs is noted on the silksreen on the top side of the board. For more reinforcement, bridge the connections between...

sdramThingZero - 133MS/s 32-bit Logic Analyzer
Instructions from sdramThingZero - 133MS/s 32-bit Logic Analyzer
Solder up them Address-Lines (And Clock)The core-concept behind sdramThing is that of loading (half of) the memory-locations with commands that will be (eventually) directly fed-back to the SDRAM itself. Taking into account the characteristics of SDRAM,...

Decoding Eddystone UID
Instructions from Bluetooth Beacon proximity gateway
Beforedecoding the advertisement data, we need to understand what isEddystone. Eddystone was created by Google as a open format to be used on Android and iPhone devices. On the format specification, 4 different format are described. Eddystone-UID – Used...

The Talking Microtronic Computer System Emulator
Instructions from The Talking Microtronic Computer System Emulator
Set up the hardware - the emulator main sketch shows the pin layout: // // SD+Ethernet Shield (optional) // #if defined (SDCARD) #define SDCARD_CHIP_SELECT 4 // // software serial interface for Emic 2 TTS module (optional) // #if defined (SPEECH) #define...

Uploading the code
Instructions from Arduino Controlled Safe (Locker)
*** FIRST DOWNLOAD AND INSTALL THE PASSWORD AND KEYPAD LIBRARIES *** JUST EXTRACT THEM IN ARDUINO LIBRARIES FOLDER Install the above mentioned two libraries. You can download them directly from the library manager or you can download the zip file and...

Setting Up the Drone Transmitter
Instructions from DIY Radio Controller for Drone | nRF24L01
In this step, we will complete the Transmitter setup. We will do the circuit part first and after that, we will upload the code to the Arduino UNO to wrap up the setup. The materials required for this step are the NRF24L01 Transceiver module, Arduino...

Thanks!
Instructions from Smiley TOF Module
This project would not be anywhere near as complete without some awesome online resources and some awesome people. I would like to thank the devs at Adafruit for making some incredibly useful resources. I referred to the Metro Mini and VL53L0X product...

Checking to start
Instructions from Pulse sensor to actuate a Robotic Hand
First check the you have necessary materials to make the project. You need some 3D printed parts, so a printer is necessary or at least the posibility of print. We print with protopasta carbon fiber filament but you can print in PLA, thats if you want...

Aeroponic All-year Greenhouse on a Budged
Instructions from Aeroponic All-year Greenhouse on a Budged
Next we will prepare the water flow. I decided to use this combination of pump and tubing, because they fit without an adapter. Other combinations work also. Clear tubbing isnt the best solution, because algae will grow inside the tubes. you can prevent...

1
2
3
4
5
>
>|