Close

268 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%89%B9%E3%83%99grace%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EF%BC%B3%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%D0%B5%20%D1%8F%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EB%B9%84%EC%9A%A9superstition%20%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%80%B2%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%C2%A7%EF%BC%98fetch"

  • Final assembly
  • Instructions     from Universal Speed Reducer
  • Components list :Gearwheels and Head assembly1 x Top4 x Screw M3 x 201 x Needle Roller Thrust Bearing 40x60x3mmScrew the four M3 x 20  2. Insert the needle roller thrust bearing in the top

  • Luggable PC
  • Instructions     from Luggable PC
  • Add rod end to serve as main hinge pin1 x Steel Rod End 1/4"-20 Thread Size, 1/4" Hole ID, 2" Length, 3/4" Long Thread (McMaster-Carr 6066K67)The specific McMaster-Carr item was not machined to precise dimensions. Some modification with a Dremel grinding...

  • Materials and Tools
  • Instructions     from PantoProbe
  • Things you'll need to build a PantoProbe: Materials: 4 x 0.2" lengths of  3/16" brass tubing4 x 0.69" lengths of   5/32" brass tubing8   #8 SAE flat washers 1   1/4-20 nut1   1 " long 1/4-20 bolt5   3D Printed...

  • LEVEL 2
  • Instructions     from PORTABLE Space Trash Game Console
  • We used a 55 x 35 mm prototype board for Level 2 of this project and added three push buttons to it: two 6 x 6 mm push buttons for up and down, and one 12 x 12 mm push button for fire.Next we added Three 1K Resistor with each push button.The resistor...

  • CODE
  • Instructions     from Open-Source Shallow Water Glider
  • The first code chunk declares the variables and establishes connections #include #include "Wire.h"#include #include "GravityTDS.h"#include #include #include "MS5837.h"#include "ping1d.h"#include "SoftwareSerial.h"#include "RTClib.h"#include //#include...

  • Camera and LED Panels mounting
  • Instructions     from A DIY Imaging Fluorometer
  • Here is where the fun starts. Find the centre of the heatsink and drill a 16mm hole. This is to accommodate the USB 3 cable to connect the camera and the LEDs wiring. Put the USB cable through the hole and connect it to the camera. Please the camera...

  • Material
  • Instructions     from DIY PCB holder
  • The materials to make this PCB holder are aluminum, except for the threaded bar that is in iron. I used 3 types of rods:  Round with a diameter of 6 mmSquared 10 x 10 mmRectangular 20 x 5 mm, that are used for the jaws Plus the threaded...

  • Print Housing
  • Instructions     from Microbit Binary Clock
  • The housing needs to be 3D printed. The bottom piece does not need supports. The top piece should have supports for the holes where the pegs in the bottom piece slide in. Play with the support settings in the slicer (I used Cura), so that you have you...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday