Close

268 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%89%B9%E3%83%99grace%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EF%BC%B3%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%D0%B5%20%D1%8F%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EB%B9%84%EC%9A%A9superstition%20%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%80%B2%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%C2%A7%EF%BC%98fetch"

  • Sigma Derby Clone

  • Program odds display)The board will receive the same 5 digit signal as the other boards, and break out the first two digits to print the odds.Left 5 odds display:#include int h45odds = 0; int h35odds = 0; int h34odds = 0; int h25odds = 0; int h24odds...
  • RESULT

  • Here's the result of this small build- a completely functional portable game console, loaded with the classic space trash game from old Nokia phones. The ESP32C3 chip is the reason that this setup functions flawlessly. Although the code is somewhat lengthy,...
  • analog2pi

  • Build it like this. Orange and purple are inputs, black is ground.CALIBRATIONNOTE: These instructions are for a character device kernel module. I will re-write them when I finish a proper sound device kernel module. They're also horribly confusing -...
  • Arduino GPRS IOT Weather Station

  • Arduino Soil Probe Using DS18B20 and DIY Moisture Hardware:As a fanatical gardener or a professional farmer, knowing the environmental conditions of our soil is invaluable. Obviously, we can't measure the number of worms or pieces of organic humus, but...
  • Construction of Probe

  • Cut 2.0 x 1.5 breadboard lengthwise such that one piece had the center screw holes intact.   P1 is pressure side of pressure sensors.  P1 is port closest to Pin 4.  Pin 1 is the notched pin.  Solder pressure sensors to breadboard...
  • Import MPU6050 library and upload the code

  • For this code you need first to add the MPU6050 library to Arduino, you can do it manually , or use Include Library -> Manage Libraries... and search for MPU6050  Then copy this code and Upload it to your Arduino. If you are using Arduino Pro...
  • Think about a layout or box

  • If you want to build this project I suggest you think about a box first. My prototype proves the electronics and software works. For the new prototype CarbOnBal Basic, I wanted a box, it looks better and is much easier to handle.  My design (if...
  • Axis assembly

  • Feed the leadscrew through the central horizontal hole and through the nut. Spin the arm down the thread about half way down. Take the motor support and rail support asembly and into one of the 4mm holes insert a 31mm threaded rod with 5mm of rod visible...
  • 2. Elephant Detector

  • Elephant detector software What are some of the approaches we can use to make an elephant detector with CNs? Elephant Detector Approaches using CNs https://hackaday.io/project/20448-elephant-ai/log/68344-elephant-detector-approaches-using-cns #software...
  • Testing

  • Capacitance testing I tested the capacitance range in three ways.  1. Using a commercial LCR meter (Extech 380193)2. Using a NanoVNA set to 30 MHz3. Using an Array Solutions VNA (VNA-UHF )Reliable measurements required careful calibration and testing. ...
  • Back Panel

  • The components are attached to a baseplate (95(W) x 128(L) mm), which is fitted to the back of the MDE's with M3 X 25mm bolts and 10mm standoffs. Four bolts are fitted through the holes in the Neopixel support board and the standoffs fitted to attach...