Close

270 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%89%B9%E3%83%99grace%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EF%BC%B3%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%D0%B5%20%D1%8F%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EB%B9%84%EC%9A%A9superstition%20%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%80%B2%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%C2%A7%EF%BC%98fetch"

  • Installation
  • Instructions     from Modern tools for Windows 3.11 software development
  • You can follow the video tutorial (part 04:24-05:55), or follow written instructions. To start, you need to: download the latest release of IDE package from GitHub: https://github.com/adbrt/cb-legacy-dev/releasesit will contain the installation script,...

  • Flashing the firmware
  • Instructions     from Oasis 3DP
  • For this step you will need the Arduino IDE, and teensyduino installed. HP45Connect the Teensy 3.2 on the HP45 board with USB to the PC. For the HP45 firmware, Open "HP45_Standalone_V3.00.00"  (or higher) from the make package->Firmware->HP45 in...

  • Part list
  • Instructions     from Magic Frame : Turn Everything into a Touch Area
  • When I am working on a project, I like to build things that are the most cost efficient possible but still of good quality. So even those on a tight budget can afford to build their own. It's hard to give the exact amount of money spent, as...

  • Final Test / Power Up
  • Instructions     from THB6064AH-SMT Stepper Motor driver
  • 13. [ ] Apply only the +5 volt power again, verify the power LED lights and nothing gets hot. 14. [ ] Power off, connect motor power (but don't turn it on!) and the motor. For help with sorting out the motor leads, see: Stepper...

  • Adding the Sixfab 3G/4G Base Hat and Quectel Module
  • Instructions     from Mesh Gateway
  • Read the getting started guide: https://docs.sixfab.com/docs/raspberry-pi-3g-4g-lte-base-hat-getting-started Use the QMI interface with Base Hat guide: https://docs.sixfab.com/docs/qmi-interface-with-base-hat Below are the commands you will need to run,...

  • Step 10
  • Instructions     from DIY Decorative lamp | Home Decor Ideas
  •  Move camera under model and select Bottom Polygons with Right Mouse Button Then select Move Tool and set Y to 50 Select exactly the Foundation copy Then open Scale Tool and set X and Z to 80

  • robotic_arm
  • Instructions     from robotic_arm
  • ⦁ Take the wooden piece C (9cm x 2 cm) and fix another servo motor using super glue at a distance of 20 mm from one side.

  • PCB Design
  • Instructions     from Power Monitoring for your Mobile Home
  • The PCB design is really just a motherboard to link the various breakout boards I used to the ESP-32 wroom dev board I used.  The PCB is powered by by the electrical hook-up and comes on everytime the hook-up is connected and powered up. For this...

  • Track mover
  • Instructions     from Track mover
  • Track Mover Speed Estimated:0 to 7.386 MPH 6200 Motor RPM / 15.9 gear reduction = 390 RPM Main Drive Cog. 390 RPM / 60 = 6.5 RPS6.5 RPS X 20 " Cog diameter = 130 Inches per second130 inches per second of the track = 7.386 MPHAverage walking speed = 3...

  • Adding heat sinks
  • Instructions     from Upgrade your Loxone with 16A SSR outputs
  • In the functional test I only used a small lamp to test it. The SSR will likely heat up when the load uses more amps. I will order thin heat sinks on a short notice (https://www.aliexpress.com/item/10-Pcs-20mm-x-20mm-x-6mm-Aluminum-Heatsink-for-IC-MOSFET-SCR/32796398225.html)...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday