Close

5943 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • trump piñata
  • Instructions     from trump piñata
  • Solder your components.... Use the longest headers you can find or an assortment of male headers and female headers (safer/easier for troubleshooting) to sandwich the teensy between the prop_shield and the audio shield....Above is shown the prop shield...

  • Norman, Coordinate
  • Instructions     from Norman, Coordinate
  • Remove the battery pack resistor, install lithium cells Step 1: Remove the top piece of the battery pack. Step 2: Without breaking the switch or battery contacts, carefully cut away the current limiting resistor and LED lead wires.Clip and discard the...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 3: Install the bulkhead fittingThis step is very easy, but it's also your biggest potential leak. Don't worry about that too much now; leak hunting is great sport in the world of vacuum chambers, and there's plenty of time for it later. Find your...

  • DIY electrically heated sauna
  • Instructions     from DIY electrically heated sauna
  • Some stoves come with temperature control, but mine didn't. There are dedicated sauna control panels with a timer and temperature control, but they cost upwards of £95. It should be possible to cobble one up myself for less.So I bought this from...

  • Introduction
  • Instructions     from Pet Pot
  • Introducing Pet Pot - Not Your Ordinary Planter! Have you ever wanted a plant that communicates with you? Well, that's exactly what Pet Pot is all about! Pet Pot is not just an ordinary planter; it's a smart planter with a unique personality. Pet Pot...

  • Blade
  • Instructions     from Electro Knife for Simulated Combat EleKSCo
  • Welcome to the final steps. Make sure the battery is out of the knife.We need to cut off part of the handle from each knife. Measure back from the finger-guard approximately 1 1/4" (30mm) and cut straight across with a saw. I used a hack saw with a 21tpi...

  • Speed Test
  • Instructions     from Speed Test
  • Powershell scriptNow that you have your account set up, we can get the powershell script running! Open up a blank text document in your favourite editor. Notepad would do just fine.Paste the following in: $a=Get-Date; Invoke-WebRequest http://client.akamai.com/install/test-objects/10MB.bin|Out-Null;...

  • Rocking the Horses
  • Instructions     from Rocking the Horses
  • Phase 1: Step 5Write some Gcode!Learn how to properly initialize your machine. There are plenty of tutorials and explanations of this, but expect to have something like the following string of code at the top of your program: G21 (Units in millimeters)...

  • DIY RaspCade
  • Instructions     from DIY RaspCade
  • 3. DisplayThe screenThe screen we are using was part of a now discontinued case for the Raspberry Pi called the Qubit. It is a 7-inch IPS screen with a maximum resolution of 1024 x 600 and looks fantastic when up and running. If you are looking for the...

  • Norman, Coordinate
  • Instructions     from Norman, Coordinate
  • Mount the LEDs Step 1: Go along the LED chain, marking one side of each LED.Be sure that all LEDs are marked on the same side. Step 2: Cut the LED string to make a pile of individual, LEDs, each with a mark. Step 3: Thread the LEDs onto the proto board,...

  • Forward array
  • Instructions     from PiTagErrUs
  • The forward array is the "business end" of the tagger. It is the most complex part with the tightest tolerances. A lot of work went into making this piece work. Plus, I like the way it looks. Since I started this project I knew this piece would always...

  • Building the Frame
  • Instructions     from Seismometer
  • Cutoff two pieces of copper pipe 11" long, one 22", one 4 1/8", and two 1.5". Use a pipe cutter for this, it will make nice square edges.Drill a 1/4" hole through the center of the 4 1/8" piece for the eyebolt. Insert the 1.5" long pipe as connectors...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday