2037 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

Ping3D - The Next-gen Table Tennis Blade
Instructions from Ping3D - The Next-gen Table Tennis Blade
Project and Printing SetupBefore you get started, please make sure you have a few things:3D Printer (or 3dhubs)Minimum build plate 200mm x 200mmNinjaflex (any color)Regular PLA or ABS

Bike improvement: fitting a rack
Instructions from Bike improvement: fitting a rack
Go to the hardware store. For this project the following supplies were needed:2 x 50mm L-shaped mounting brackets1 x M6 screw, 40mm long1 x M6 washer1 x M6 locknut (it resists better to the vibrations than regular threaded nuts)2 x M5 locknuts (the rear...

3D Printing
Instructions from Binary Wrist Watch
Because this was something I wanted to use on a regular basis, the watch needed to look polished and not super DIY. That's why I had the watch body profesionally 3D printed. If you have access to a 3D printer with great resolution and strong materials...

Electric Carving Knife Hack!
Instructions from Electric Carving Knife Hack!
Connecting Dildos Cut into it If you have a regular silicone dildo lying around (We have MANY), cut a slot in the back, and stick the attachment into it. Using existing holes Lots of toys have existing holes in the back for putting in a bullet vibe....

Build the Surface, Playing With Plexiglass and Mirror
Instructions from Magic Frame : Turn Everything into a Touch Area
Another tricky part was building the detection area. I didn't know which material to choose so I started with glass panels. But it was too fragile to manipulate and cut so I moved to plexiglass. A plexiglass panel of 420x720, 5mm thick carried most of...

Assemble your Printer
Instructions from The Trash Printer - Version 3
You can check out the interactive model for the Trash Printer on the SketchUp 3D viewer, or download it from the SketchUp 3D warehouse. You can use this model as a reference to see how all the parts go together, and you can also use it to modify...

How to generate a character bit map in Flash
Instructions from NTSC/PAL Video Display Shield
Ingredients: The Dot Factory: An LCD Font and Image GeneratorA True Type font of choice: Hack (which is also a beautiful font for source code editing)A display that uses pixels.An Arduino Video Display Shield (Have you understood recursion already? ;-)...

Wiring Arduino to transistor and relay
Instructions from MacBook Speech Recognition Starts A Jeep
Here is a diagram for the KRPA-11DG-12 relay which I found at https://www.digikey.co.il/product-detail/en/te-connectivity-potter-brumfield-relays/KRPA-11DG-12/PB169-ND/45030: If you are not familiar with electromagnetic relays, they are basically a switch...

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Section: 7A Completed Spectrometer. A note might be made here that this spectrometer can and will function as an independant device connected to a regular PC running the ramanPi spectraCide software! If you wanted to use it and not build...

VR Tracker
Instructions from VR Tracker
Let's sum up what we have done so far :we ordered a pair of color tracking cameraswe modified them into Infrared tracking cameraswe updated their firmware to track Infrared and tested themwe built a small case to give them a nice lookThere is one last...

Upload firmware to Arduino
Instructions from Mug-O-Matic: A Modular Tiny CNC
Copy the relevant arduino code from the github. https://github.com/mechengineermike/Mug-O-Matic Download the latest Arduino IDE https://www.arduino.cc/en/Main/Software and paste the code from the TinyCNC Github in there. Connect the usb...

Hardware
Instructions from Virtual Forest
1. From a length of 10 cm PVC pipe cut roughly 60 - 70 cm of pipe. This will house the Raspberry pi and the Ricoh Theta housing will rest on top of this. Insert the wooden fence pole into the PVC pipe and mount permanently with some wood screws through...

Transparent Wood
Instructions from Transparent Wood
MaterialsThin pieces of wood (mine ranged fro .75mm-3mm - thicker takes more dissolving time)Large pyrex container (chemicals won't corrode it or react with it) (I used a glass brownie pan)Small scale (for weighing chemicals)Hot PlateMixing CupsPopsicle...

DIY Complete Philips Hue Home Automation
Instructions from DIY Complete Philips Hue Home Automation
LIGHTS: IKEA TRADFRI:Open http://{bridgeIP}/tradfri, type Ikea bridge ip and security key in form and then click "Save". If everything was fine you will see all lights paired with Tradfri bridge in Hue applications. Important: coap-client-linux binary...

POPgirl Software Setup
Instructions from SHE BON
PopGirl Hardware and Software Much of this is typed from memory and may be missing a step or some other detail here or there. Please feel free to share any corrections or contact us to help you get through a step that is failing. In a nutshell:...

1
2
3
4
5
>
>|