6194 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

Mini Potato Cannon
Instructions from Mini Potato Cannon
3.) Push the hot paperclip through the pen tube about 1/4 inch from the end.

Mini Potato Cannon
Instructions from Mini Potato Cannon
4.) Shove the paperclip end of the tube into the hole in the bottle, until the paperclip is touching the bottle (but not inside it).

Mini Potato Cannon
Instructions from Mini Potato Cannon
7.) Poke 2 holes in the cap of the bottle about 1/4 inch apart, using another hot paperclip.

Paperclip Chainmaille
Instructions from Paperclip Chainmaille
1.) Straighten out a paperclip.

Paperclip Chainmaille
Instructions from Paperclip Chainmaille
2.) Wrap the paperclip very tightly around a small, 1/8 inch diameter rod or screwdriver.

Paperclip Chainmaille
Instructions from Paperclip Chainmaille
4.) Snip off each ring from the coil.

Make and Feel Virtual Drawings
Instructions from Make and Feel Virtual Drawings
Make Processing control Arduino THE FINAL PROGRAM:So,you have started drawing on Processing. Now, you'll 'feel' the drawing!Imagine you are blind (remember, this device was invented for blind people to draw on computers):How would you feel a raised line...

Make and Feel Virtual Drawings
Instructions from Make and Feel Virtual Drawings
Power to Servo motor So, we've written the code. Now start all wiring stuff:We have two options:Give 5V to servo motor from Arduino.Here, you can connect the servo motor ( attach a small fan to the motor ) to Arduino Uno. Servo motor has 3 wires: Connect...

Quick and Nasty Tube Power Supply
Instructions from Quick and Nasty Tube Power Supply
For this step you will want a variac or some way to limit the mains current. You might want to put a lamp in series with the hot wire to the transformer (are you sure you're comfortable working with mains electricity?)Connect everything up as you did...

Connecting 5V sensors to OpenWrt GPIO
Instructions from Connecting 5V sensors to OpenWrt GPIO
OpenWrt setupI use GPIO 29 so for input the setup looks like this:/etc/rc.local: # Put your custom commands here that should be executed once # the system init finished. By default this file does nothing. echo “29″ > /sys/class/gpio/export; echo...

Connecting 5V sensors to OpenWrt GPIO
Instructions from Connecting 5V sensors to OpenWrt GPIO
Output:And /etc/rc.local for output # Put your custom commands here that should be executed once # the system init finished. By default this file does nothing. echo “29″ > /sys/class/gpio/export; echo “out” > /sys/class/gpio/gpio29/direction...

Jewel Box Servo Meter
Instructions from Jewel Box Servo Meter
Bend the pins on the header at a right angle. Drill 8 holes 1/16-inch (1.6mm) diameter in a line spaced 0.1-inch (2.54mm) on centers. Pass the pins through the holes with the header on the underside of the box.

Portable LED Floodlight
Instructions from Portable LED Floodlight
Spend some time on your LED and battery selection. These are the two most expensive items, and of course the most important.In my case I'm trying to light a volleyball court. The light I'm considering is available in 30º spread or 60º spread....

ChipWhisperer®: Security Research
Instructions from ChipWhisperer®: Security Research
Add the ZTEX LX25 FPGA Module, which with the OpenADC, should now look like this, using a 0.375" hex stand-off with 4-40 screws for the OpenADC:

ChipWhisperer®: Security Research
Instructions from ChipWhisperer®: Security Research
Optional (see #5, option of hard or soft enclosure): Make an enclosure out of a Hammond 1455N1602 case (Digikey part # HM980-ND). This case has plastic end panels which you can easily modify with a hot knife, file, etc. For the front panel you can print...

|<
<
3
4
5
6
7
>
>|