Close

1585 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%89%B9%E3%83%99grace%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EF%BC%B3%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%D0%B5%20%D1%8F%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EB%B9%84%EC%9A%A9superstition%20%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%80%B2%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%C2%A7%EF%BC%98fetch"

  • Source Code
  • Instructions     from Arduino Amazing Interactive Snowflake
  • #include "SoftPWM.h" #include byte edgeLedPins[] = {13, A4, A5, 2, 8, 12}; byte middleLedPins[] = {10, 6, 3, 5, 9, 11}; byte innerLedPins[] = {A2, A3, A1, 4, 7, A1}; ADCTouchSensor touchSensor = ADCTouchSensor(A0, 1); void setup() {   Serial.begin(115200);...

  • Header Pins
  • Instructions     from Sig7Seg - controller for mechanical 7 segment
  • Solder on the 3 sets of three pin headers for the i2c address (A0, A1, and A2). You'll need to attach a jumper to each one to pull the pin high or low (chip will not work if these are left floating). The remaining header pins are optional depending...

  • Run a Code
  • Instructions     from AC Voltmeter using Arduino
  • int m; // initialise variable m float n; //initialise variable n void setup() { pinMode(A0,INPUT); // set pin a0 as input pin Serial.begin(9600);// begin serial communication between Arduino and pc } void loop() { m=analogRead(A0); // read analog values...

  • Run a Program
  • Instructions     from IoT Digital Thermometer using LM35 and NodeMCU
  • #include const char* ssid = "*********"; // Your ssid const char* password = "***********"; // Your Password float temp_celsius = 0; float temp_fahrenheit = 0; WiFiServer server(80); void setup() { Serial.begin(115200); pinMode(A0, INPUT); Serial.println();...

  • NANO-4096
  • Instructions     from NANO-4096
  • Finally screw the spacer onto the joystick breakout boardSolder the joystick onto the perfboard and connect VCC (5v) and GNDConnect the X pot to A1 (Since the board is rotated X becomes Y)Connect the Y pot to A0Key is not connected

  • Assemble the Four Adafruit Trellis Modules
  • Instructions     from Kord Kontroller
  • Solder up the four Adafruit Trellis modules.  If desired, add LEDs to the top side of the board.  The orientation for the LEDs is noted on the silksreen on the top side of the board.  For more reinforcement, bridge the connections between...

  • Understanding how to disconnect the speaker
  • Instructions     from Hush Owlet
  • moThe big black device in the middle of the printed circuit board (PCB) is the speaker (aka buzzer, or transducer). You can see a little slit in the one side where the sound comes out. There is a back side to the circuit board that you cannot easily...

  • Decoding Eddystone UID
  • Instructions     from Bluetooth Beacon proximity gateway
  • Beforedecoding the advertisement data, we need to understand what isEddystone. Eddystone was created by Google as a open format to be used on Android and iPhone devices. On the format specification, 4 different format are described. Eddystone-UID – Used...

  • Counting Muscle Impulses
  • Instructions     from Counting Muscle Impulses
  • Attach the SpikerShield to an ArduinoThe output of the SpikerShield is an analog value between 0 and 5 volts. It is connected to one of the Arduino's analog inputs. There is a jumper on the shield to determine which one. I keep mine on A0.

  • LinkTrucker
  • Instructions     from LinkTrucker
  • Solder the +V pin from the Green LED on the RJ45 Ethernet connector.Connect this to A0 on the UNOYes - there IS possibly a way to do this in software, but I am a hardware hacker and this works great!
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday