Close

65 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EA%B2%AC%EC%A0%81%E3%82%88%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8ago%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8eighty%20%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%CE%BA%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%E2%92%B2%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EF%BD%83%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8literary"

  • Hinge assembly
  • Instructions     from Zvychai One
  • Grab both M5 x 20 bolts, align alpha/omega hinge parts together, apply washers to the external side and put on the wing nut: You can do this also with the hinge already installed on both keyboard carrier and primary case, but if you did not - do it now....

  • Building the HV Interface Cable for G1 Volt
  • Instructions     from DC-DC Solar EV Charger
  • This is the trickiest part because the high voltage high current EV coaxial cable is not available to consumers. And the HV connectors are nearly as difficult to get and figure out what parts you need. I used a 4 conductor cable to keep a ground wire...

  • 3D-Printed Electric Longboard
  • Instructions     from 3D-Printed Electric Longboard
  • Step 4: Idler SystemAt this stage, your mount is already capable of accelerating but it will not be able to brake efficiently. This is where the idler system comes in. It makes sure that the belt has constant contact with the pulley wheel even during...

  • 3D models

  • Instructions     from Wall-U
  • 3D print the caterpillar tracks : we printed 40 pieces in total (20 for each side), 2 main wheels for the motors and 4 secondary wheels. We assembled the tracks using M4x25 screws and bolts.  3D print the arms and the mechanism that go with them....

  • DESIGN
  • Instructions     from Li-ion Cell Charger with TP4056 and XIAO ESP32S3
  • The process of designing the battery charger began with the making of a model for the circuit, which will include an SSD1306 screen and a Li-ion cell holder mounted on a 1.5 mm thick PCB. In addition, we had to model the circuit for the DC-DC Buck Module,...

  • Building the AUV - Internal
  • Instructions     from Project Albatross
  • The internals of the AUV performed the heavy work of actually taking water quality measurements and controlling the submersible's buoyancy. Evidently, it also required a sophisticated mechanical design to fit the necessary components into the confined...

  • Wiring for UV Tube
  • Instructions     from Ultraviolet Microwave (name subject to change)
  • My instructions errs on making the wires too long. It’s easier to fix mistake with longer wires than too short. You can follow the schematic for how to wire this up and skip the detailed instructions. Take one of the tube wires and form it so that it...

  • mandelHari.py
  • Instructions     from Mandelbrot on Pi Pico
  • # Mandelbrot adapted for Pi Pico by Hari Wiguna from: # https://www.codingame.com/playgrounds/2358/how-to-plot-the-mandelbrot-set/mandelbrot-set def main(): import board # Pi Pico Board GPIO pins import displayio # Python's multi layer graphics import...

  • Hand Drive
  • Instructions     from Hand Drive
  • Hand Drive Assembly InstructionsPrint out the parts(1) Annular gear(1) Bar Holder(1) Base(1) Knarp Tensioner(3) Planet Gear(1) Ratchet(1) Stacked Gear(1) Sun Gear1)Hammer in three 5/16 inch bearings into underside of the sun gear.2)Attach three planet...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday