Close

279 Results for "Y 대전 프로토 베팅 CDDC7.COM ▧프로모션번호 B77▧농구경기분석ϧ에스퍼홀덤℁KB손보👢메이저리그라이브중계ӈ대전 프로토 베팅애용 assurable/"

  • How to use Cura for slicing
  • Instructions     from Tool Switching - Multi Extrusion
  • I've created a plugin for Cura version 2.6.2 and 2.7-BETA. To use it download ToolChangePlugin.tar.gz, unpack it in the appropriate folder (eg. $HOME/.local/share/cura/2.6). An example definition for a printer with 3 hotends is provided with the...

  • Blynk App #4 - Joystick
  • Instructions     from Wi-Fi Controlled Robot Using Blynk App
  • In this app I used a single joystick to control the robot. The speed of each track is defined deppending on x and y positions of the joystick. This way, it's possible to apply different speeds on each track, and move the robot with different speed/directions....

  • Drilling Part I
  • Instructions     from Ender 3 PCB Drilling
  • Place the PCB to be drilled on top of a cardboard sheet (it doesn't need to be thick, mine is 1mm), which goes on top of the Ender 3 printing table. Hold everything with clamps on the corners. Alternatively, you might use double-sided stick tape.Manually...

  • Circuit diagram
  • Instructions     from Mega2USB
  • [5v0]---+-------+--------------------------------[5v0] | | | | ,------------------(4)---------[GPIO-D7] | | | ,----------------(3)---------[GPIO-D2] | | | | ,--------------(2)---------[GPIO-D1] | | | | | ,------------(1)---------[GPIO-D0] | | | | |...

  • Building an OpenCV Project In C++
  • Instructions     from GuardMyPi
  • 1. Install CMake on the Raspberry Pi sudo apt-get -y install cmake 2. Save the following under CMakeLists.txt (within the same directory as the project) cmake_minimum_required(VERSION 2.8) project( Project ) find_package( OpenCV REQUIRED ) include_directories(...

  • Assemble the car
  • Instructions     from Monsterrhino printer car
  • Connect the MonsterrhinoMotion and MonsterrhinoControl to the 24V source (e.g. battery). Foresee a power switch at the 24V line.Connect the CAN between MonsterrhinoMotion and MonsterrhinoControlConnect the display to the MonsterrhinoControlConnect the...

  • AMG8833 installation and test
  • Instructions     from Remote Infrared Thermometer Alertor
  • - Pi 3V3 to sensor VIN - Pi GND to sensor GND - Pi SCL to sensor SCL - Pi SDA to sensor SDA 1.Python Installation of AMG88xx Library sudo pip3 install adafruit-circuitpython-amg88xx 2.Open i2c interface from Pi  sudo raspi-config 3.Interface Options--->I2C--->Enable ...

  • Know the positions
  • Instructions     from 3D Print Time lapses Without Octoprint
  • You need three coordinates for the X and Y axis before getting to the next step. 1. The position of the build plate that you want it to stop after each layer finished for taking the pictures, let's call it 2. The position of the print head TOUCHING the...

  • Https://jlcpcb.com/RAV
  • Instructions     from Vumetro LM3915
  • Primeramente cuando ya tenemos el Gerber del circuito realizado en cualquier software de diseño electrónico entramos a la pagina de https://jlcpcb.com/RAV subimos el Gerber de nuestro PCB Y Ahí obtendremos 5PCB a $2 Gerber del circuito...

  • Libraries
  • Instructions     from Christmas Carol with OLED and Buzzer
  • In Arduino IDE, Go to Tools > Manage Libraries > Search "SSD1306" on the Library Manager. This library will help to initiate and set up the OLED screen from the preferred Communication easily with the Arduino IDE. Below code will initiate the library...

  • Tips, Tricks and Gotchas
  • Instructions     from Eep Oop Ork
  • To load programs to Eep quickly I used minicom's ctrl-a, y command to paste a file that contains the keystrokes to program the Eep.  I know it's very kludgy, but hey, it's hackaday and Eep is just for fun. By default address and values are...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday