10946 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Testing Everything!
Instructions from SIGHT: For the Blind
Before we mounting everything in an enclosure, just make sure everything is working perfectly. Just turn ON your raspberry Pi3 and wait a 5 second to load everything. Press the button to take a shot using the camera and wait another second. You can hear...

Illuminatrix
Instructions from Illuminatrix
Issue commands to the firmware either directly or through the Octoprint plugin. Everything should now be working.

Building the AUV - Internal
Instructions from Project Albatross
The internals of the AUV performed the heavy work of actually taking water quality measurements and controlling the submersible's buoyancy. Evidently, it also required a sophisticated mechanical design to fit the necessary components into the confined...

Mandalorian Infiltration Vambrace
Instructions from Mandalorian Infiltration Vambrace
Step 2: Order some stuff. Find the shopping list above in the components section and purchase everything from Amazon, Harbor freight, or your local Walmart.

Make bootable USB and set up software
Instructions from Digital Photo Frame from obsolete laptop
Test everything before you take it apart - then make backup of the USB or config files.

recordShelf
Instructions from recordShelf
Test LEDsPrior to mounting anything, I suggest wiring everything up on a workbench (or the floor) and making sure everything is wired correctly and happy.

How to test
Instructions from 3D printed cute barometer
After you mount everything together, you should have a visible movement of the needle when you hold the jar into your hands. The mild heating of the jar in this case, causes the air trapped inside to expand and to move the membrane upwards. This quick...

Soldering and Wiring
Instructions from TeleBall - Retro Handheld Game Console
Solder and wire everything. The case and PCB design guarantee, that no additional screws or fittings are needed: Everything fits together thanks to the custom 3D printed case and soldering the 8x8 LED display on the PCB will hold the PCB and the case...

The world's first paper quadcopter
Instructions from The world's first paper quadcopter
Repeat step 1 and then cut to 11 inchs. make sure everything is even and tape some more on the ends of tube.These are the arms.

IoT Connected Picture/Desk Frame
Instructions from IoT Connected Picture/Desk Frame
4. The Front coverAfter printing the Front cover on transparent foil everything is read to be assembled together:

Storage Container
Instructions from Storage Container
Remove the screws, apply some glue between all the panel joints, put everything back together and screw down tightly. Wipe away any excess glue and let it all dry for a couple of hours.

3. Solder everything else
Instructions from K.I.T.T. - KNIGHT RIDER badge/brooch
just take your time, pre tin one pad, use pliers or tweezers to push a part into the hot solder. Then solder on every other leg or pin of the part.

9
Instructions from Harmonic Gear Driven Star Tracker
insert motor (with motor mount and oval drive installed) mount onto stage 1 and bolt everything together with 4x M3x60 bolts and 4x M3 nuts

Insulate the acrylic
Instructions from Peltier Cloud Chamber
Put some more PE tape on the bottom side of the acrylic sheet around the peltier cutout and the screws to really make sure everything's well insulated.

Have fun!
Instructions from Ctrl+Fight!
Once everything is set up, put the vest on a mannequin (or someone) and hit on the front boxes to attack in game. Put you feet in front of the lasers to move right or left.

1
2
3
4
5
>
>|