2277 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

Pressure Cooker Vacuum Chamber
Instructions from Pressure Cooker Vacuum Chamber
Step 6: Vacuum time Well, we're finally here. It's time to turn on the vacuum pump, and run for cover. Maybe.Before we actually flip the switch, a few words of caution from our sponsor.First, be sure to read the instructions that came with your pump....

Sugarcube - a tactile music controller
Instructions from Sugarcube - a tactile music controller
Two 74HC595s (wired in parallel) will be driving all the LEDs in the project as well as providing power to all of the buttons. The 74HC595 is an 8 bit serial in parallel out shift register. I've written a detailed tutorial about multiplexing with the...

Sugarcube - a tactile music controller
Instructions from Sugarcube - a tactile music controller
I borrowed an idea from my friend Mads Hobye for my enclosure. Mads founds these sleek boxes at the container store and used them to make project enclosures for the various musical instruments he's built. These boxes are particularly convenient because...

Guided Rocket
Instructions from Guided Rocket
Drill 3mm holes in the necessary spotsScrews ready for mountingOuter ring will be attached to this pivot

Guided Rocket
Instructions from Guided Rocket
Buy and place metal gear servos in the main frame and epoxy the tabs. Next attach 1 rod to each ring, and to each servo so that the rotation of the servo changes the angle of the ring

Guided Rocket
Instructions from Guided Rocket
Using the diagram, make a power distribution board for the servosThis is roughly what it should look like

FireCoates
Instructions from FireCoates
Jacket Wiring, LED Setup, and Light Pipe Assembly.I never took pictures of this process with the first prototype so I need to complete the second prototype and take pictures to use as visual aides along the way, I should have them up in another week...

FireCoates
Instructions from FireCoates
Optional 3D Printed Jacket Module CaseDownload the Base and Top to the case and print them on your favorite RepRap OpenSource 3D Printer. It should come out looking similar to this(colors may vary ;) ):The headphone jack hole may need to be cleaned up...

ATX power supply conversion for bench usage
Instructions from ATX power supply conversion for bench usage
Prepare the cables that connect the banana jacks to the terminal strips.Mine are 2.5 mm², about 20 cm long, and have a ring terminal and a cable sleeve:You can also see two cables (red and black) attached to the switch. They are used to tie the...

ATX power supply conversion for bench usage
Instructions from ATX power supply conversion for bench usage
Add terminal strips and mounting helpers to the base plate:I later replaced the terminal strips shown in the picture (6 mm²) with bigger ones (10 mm²) because they were simply easier to work with.The PVC tubes are used to hold cable ties. Use...

ATX power supply conversion for bench usage
Instructions from ATX power supply conversion for bench usage
Build and mount the minimum load boardThe minimum load board is a piece of stripboard that carries 5 screw terminals and the load resistors:Mounted with 4 screws and 20 mm spacers, and connected to the power supply. Note that I accidentally used the...

4G LTE Yagi antenna for ATT
Instructions from 4G LTE Yagi antenna for ATT
Get some rivets long enough to go fully through your director. The normal 'long' 1/8th in AL rivets at my local hardware store were perfect (with the countersink created in step 10).

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
Building the ExhaustTools: Chop Saw or Reciprocating Saw, Files, Welder, Torx (T40) bit, Socket Wrench, 1/4" and 7/16" socketsA) Cut the materialsUsing the chop saw or reciprocating saw, cut the 1" diameter U-Turn and the 135 Bend, as well as the 1 1/8"...

Single Chip AVR BASIC Computer
Instructions from Single Chip AVR BASIC Computer
The Firmware: The standard TinyBASIC Plus sketch had to be modified in order to create a standalone computer system. The unmodified version of TinyBASIC Plus uses the serial port of the AVR to allow users to interact with the software and create programs....

Communication between two hc-05 Bluetooth modules
Instructions from Communication between two hc-05 Bluetooth modules
Put the module to be used as master into AT command mode. If you have an Arduino handy, techbitar gave an excellent tutorial on how to do that here.

|<
<
2
3
4
5
6
>
>|