5118 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

Mini Potato Cannon
Instructions from Mini Potato Cannon
3.) Push the hot paperclip through the pen tube about 1/4 inch from the end.

Mini Potato Cannon
Instructions from Mini Potato Cannon
7.) Poke 2 holes in the cap of the bottle about 1/4 inch apart, using another hot paperclip.

Paperclip Chainmaille
Instructions from Paperclip Chainmaille
1.) Straighten out a paperclip.

Paperclip Chainmaille
Instructions from Paperclip Chainmaille
2.) Wrap the paperclip very tightly around a small, 1/8 inch diameter rod or screwdriver.

Quick and Nasty Tube Power Supply
Instructions from Quick and Nasty Tube Power Supply
For this step you will want a variac or some way to limit the mains current. You might want to put a lamp in series with the hot wire to the transformer (are you sure you're comfortable working with mains electricity?)Connect everything up as you did...

Connecting 5V sensors to OpenWrt GPIO
Instructions from Connecting 5V sensors to OpenWrt GPIO
OpenWrt setupI use GPIO 29 so for input the setup looks like this:/etc/rc.local: # Put your custom commands here that should be executed once # the system init finished. By default this file does nothing. echo “29″ > /sys/class/gpio/export; echo...

Connecting 5V sensors to OpenWrt GPIO
Instructions from Connecting 5V sensors to OpenWrt GPIO
Output:And /etc/rc.local for output # Put your custom commands here that should be executed once # the system init finished. By default this file does nothing. echo “29″ > /sys/class/gpio/export; echo “out” > /sys/class/gpio/gpio29/direction...

Jewel Box Servo Meter
Instructions from Jewel Box Servo Meter
Bend the pins on the header at a right angle. Drill 8 holes 1/16-inch (1.6mm) diameter in a line spaced 0.1-inch (2.54mm) on centers. Pass the pins through the holes with the header on the underside of the box.

Portable LED Floodlight
Instructions from Portable LED Floodlight
Spend some time on your LED and battery selection. These are the two most expensive items, and of course the most important.In my case I'm trying to light a volleyball court. The light I'm considering is available in 30º spread or 60º spread....

ChipWhisperer®: Security Research
Instructions from ChipWhisperer®: Security Research
Optional (see #5, option of hard or soft enclosure): Make an enclosure out of a Hammond 1455N1602 case (Digikey part # HM980-ND). This case has plastic end panels which you can easily modify with a hot knife, file, etc. For the front panel you can print...

Skype robot
Instructions from Skype robot
Build a robot with 1:16 RC tank platform and support the tablet with aluminum structure.tank

Player One Continue?
Instructions from Player One Continue?
See step 1

RoboBarista: A Coffee Brewing Robot
Instructions from RoboBarista: A Coffee Brewing Robot
The first step to a good coffee brewing robot is to figure out how to brew good coffee. I've got some tips and tricks to brewing good coffee in the project logs ("A Dive Into the World of Coffee"), so I'll get directly into how I achieve good, full bodied...

RoboBarista: A Coffee Brewing Robot
Instructions from RoboBarista: A Coffee Brewing Robot
Effective Bardware Based Stepper Motor ControlIn my quest to derive a robot control scheme from scratch, I've been working to figure out how to control a stepper motor. Stepper motors are great because they're cheap, relatively simple to control,...

IRK! Infrared Remote USB Keyboard
Instructions from IRK! Infrared Remote USB Keyboard
Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

|<
<
2
3
4
5
6
>
>|