2002 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

Turn a cigarette lighter into an IR Nikon remote
Instructions from Turn a cigarette lighter into an IR Nikon remote
5.Program your microcontroller with the following BASCOM code:''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Infrared Remote Control Transmitter for Nikon D90' -------------------------------------------------'' ...

Portable travel NAS
Instructions from Portable travel NAS
Let's get cracking, get the Carambola up and running. I like to connect to the serial terminal, the development board features a usb ftdi chip allowing me to use a terminal program like PuTTy to connect.Connecting to serial terminalFirst step: see that...

Open Source Science Tricorder
Instructions from Open Source Science Tricorder
Step 1: Motherboard Assembly and ProgrammingI designed all of the boards to be hand solder friendly, with leadless QFNs all on one side (that can be reflowed). If the other side has components, these are usually larger and easier to hand solder. Step...

Open Source Science Tricorder
Instructions from Open Source Science Tricorder
http://www.tricorderproject.org/arducorder/chipkit-mplab-ide-0023-arducorder.ziphttp://www.tricorderproject.org/arducorder/chipkit-mplab-ide-0023-arducorder.zipStep 3: Constructing the CaseThis beautiful case is constructed from laser cut acrylic --...

ZRTP Hardphone
Instructions from ZRTP Hardphone
### [ WRITE IMAGE TO SD ]wget "http://93.174.101.10/bt/09bc05ab03780f279390e9cf6a15c7c249f712e1/data/2014-01-07-wheezy-raspbian.zip"7z x 2014-01-07-wheezy-raspbian.zipSD_CARD=/dev/sdX # Change it to your SD card device namemd5sum 2014-01-07-wheezy-raspbian.img...

ZRTP Hardphone
Instructions from ZRTP Hardphone
### [ OVERCLOCKING AND MEMORY CONFIG ]# Grow the partition# Set locales# Set hostname# Set Overclock to Turbo# Set Advanced Options > Memory Split to 16Reboot? yes

ZRTP Hardphone
Instructions from ZRTP Hardphone
### [ UPDATING FIRMWARE ]aptitude install -y git-core curl binutilswget https://raw.github.com/Hexxeh/rpi-update/master/rpi-update -O /usr/bin/rpi-update && chmod +x /usr/bin/rpi-updaterpi-updatereboot### [ END UPDATING FIRMWARE ]

Antares: Linux kernel-like buildsystem for uCs
Instructions from Antares: Linux kernel-like buildsystem for uCs
Install dependencies: git, GNU/make, gcc, flex, bison, gperfDebian/ubuntu: sudo apt-get install build-essential git flex bison gperfArch Linux: sudo pacman -S git flex bison gperfOS X: brew install coreutils git make

Wireless PIR's + Controller for PTZ Camera
Instructions from Wireless PIR's + Controller for PTZ Camera
For the controller and PIR the NRF24L01 uses the same pins to connect to arduino, Pin connections are,- Vcc - 3v3- CE - Pin 9- CSN - Pin 10- SCK - Pin 13- MOSI - Pin 11- MISO - Pin 12- GND - 0v- On the controller board you will need to connect to...

HandBot
Instructions from HandBot
First you need to verify to correct operation of the RF devices. This will be easy by a LED indicator, the control will be managed by two keys "w" and "s" of your computer's keyboard.Connect VCC to 5V pin.GND to GND pin.Data to pin 12 in both Arduinos.LED...

HandBot
Instructions from HandBot
Once you have the correct programming of what will be the engine performance you need review the functioning and values of the MPU-6050 accelerometer. The X and Y axes are as the device is marked on the card.VCC to 5V pin.GND to GND pin.SCL to A5 pin.SDA...

Motorised Z-Table Controller
Instructions from Motorised Z-Table Controller
Cut out or have board made.Install 4 x 0805 10K resistors on inputs, add 1 0603 1uF cap , solder in ATTINY 2313, add headers.Switch is optional, doesn't do anything in code yet.Program it! Wire in 5V power and switches, connect PUL to Pulse Input, DIR...

The world's first paper quadcopter
Instructions from The world's first paper quadcopter
Get a piece of 3.5 x 8.5 form board or or you can use cardboard if you use cardboard you will need 2 3.5 x 8.5 just glue them together to make one solid piece.Lay the short tubes on the sides of the board and the long tubes across the top to form the...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Lexitron circuit design and hardware:LED display: The display is constructed using Red 8x8 square LED matrix displays, each containing 64 LEDs wired in a square grid with the 16 column and row pins available out the base. It is designed to be used in...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut construction log:Construction was completed in stages over the period of many months with a design that evolved to suit the available parts. The progression of construction was arranged so that each stage could be completed and tested...

|<
<
2
3
4
5
6
>
>|