Close

2002 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • ramanPi - Raman Spectrometer
  • Instructions     from ramanPi - Raman Spectrometer
  • Section: 6A complete Filter Selector AssemblyComponents Required: Printed versions of the following 3D Printed Objects from the gitHub repository: mechanical_device_filterSelectorAssembly_frontmechanical_device_filterSelectorAssembly_backmechanical_device_filterSelectorAssembly_filterWheelmechanical_device_filterSelectorAssembly_centerHub_Backmechanical_device_filterSelectorAssembly_522nmSP_covermechanical_device_filterSelectorAssembly_550nmSP_cover(1x)...

  • ramanPi - Raman Spectrometer
  • Instructions     from ramanPi - Raman Spectrometer
  • Section: 7A Completed Spectrometer.  A note might be made here that this spectrometer can and will function as an independant device connected to a regular PC running the ramanPi spectraCide software!  If you wanted to use it and not build...

  • Portable travel NAS
  • Instructions     from Portable travel NAS
  • Let's get cracking, get the Carambola up and running. I like to connect to the serial terminal, the development board features a usb ftdi chip allowing me to use a terminal program like PuTTy to connect.Connecting to serial terminalFirst step: see that...

  • Open Source Science Tricorder
  • Instructions     from Open Source Science Tricorder
  • Step 1: Motherboard Assembly and ProgrammingI designed all of the boards to be hand solder friendly, with leadless QFNs all on one side (that can be reflowed). If the other side has components, these are usually larger and easier to hand solder. Step...

  • Open Source Science Tricorder
  • Instructions     from Open Source Science Tricorder
  • http://www.tricorderproject.org/arducorder/chipkit-mplab-ide-0023-arducorder.ziphttp://www.tricorderproject.org/arducorder/chipkit-mplab-ide-0023-arducorder.zipStep 3: Constructing the CaseThis beautiful case is constructed from laser cut acrylic --...

  • ZRTP Hardphone
  • Instructions     from ZRTP Hardphone
  • ### [ WRITE IMAGE TO SD ]wget "http://93.174.101.10/bt/09bc05ab03780f279390e9cf6a15c7c249f712e1/data/2014-01-07-wheezy-raspbian.zip"7z x 2014-01-07-wheezy-raspbian.zipSD_CARD=/dev/sdX # Change it to your SD card device namemd5sum 2014-01-07-wheezy-raspbian.img...

  • ZRTP Hardphone
  • Instructions     from ZRTP Hardphone
  • ### [ OVERCLOCKING AND MEMORY CONFIG ]# Grow the partition# Set locales# Set hostname# Set Overclock to Turbo# Set Advanced Options > Memory Split to 16Reboot? yes

  • ZRTP Hardphone
  • Instructions     from ZRTP Hardphone
  • ### [ UPDATING FIRMWARE ]aptitude install -y git-core curl binutilswget https://raw.github.com/Hexxeh/rpi-update/master/rpi-update -O /usr/bin/rpi-update && chmod +x /usr/bin/rpi-updaterpi-updatereboot### [ END UPDATING FIRMWARE ]

  • HandBot
  • Instructions     from HandBot
  • First you need to verify to correct operation of the RF devices. This will be easy by a LED indicator, the control will be managed by two keys "w" and "s" of your computer's keyboard.Connect VCC to 5V pin.GND to GND pin.Data to pin 12 in both Arduinos.LED...

  • HandBot
  • Instructions     from HandBot
  • Once you have the correct programming of what will be the engine performance you need review the functioning and values of the MPU-6050 accelerometer. The X and Y axes are as the device is marked on the card.VCC to 5V pin.GND to GND pin.SCL to A5 pin.SDA...

  • Motorised Z-Table Controller
  • Instructions     from Motorised Z-Table Controller
  • Cut out or have board made.Install 4 x 0805 10K resistors on inputs, add 1 0603 1uF cap , solder in ATTINY 2313, add headers.Switch is optional, doesn't do anything in code yet.Program it! Wire in 5V power and switches, connect PUL to Pulse Input, DIR...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday