2002 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워㏃ ∨acting강남쓰리아워㎲쓰리아워가격쓰리아워ご㈃쓰리아워lent 쓰리아워가격チ쓰리아워가격●㎫affectionate"

Arduino or Wemos Code
Instructions from WiFi Signal Strength Scanner Monitor or Checker
In the arduino code set your WiFi credentials char wifissid[] = "ENTER YOUR WiFi SSID HERE"; char wifipass[] = "ENTER YOUR WiFi PASSWORD HERE"; Normally, the signal strength is displayed in dBm. But for a non techie person, the signal strength in terms...

Cree Dimming Level
Instructions from Cree Dimming Level
Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

Create a function to decode the payload
Instructions from 2022 HDP 4 - Climate Resilient Communities
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...

Arduino-Compatible FPGA Shield
Instructions from Arduino-Compatible FPGA Shield
Step 2 - Import the Arduino board file into Altium Designer: Using Altium Designer (AD) requires that I import Eagle board into AD. AD14.x includes an Eagle importer. Used source files from the Arduino site to import in AD.

DIY SlingBox $30
Instructions from DIY SlingBox $30
#!/bin/bash##recording1.shirsend SEND_ONCE --count=2 radioshack BTN_4irsend SEND_ONCE --count=2 radioshack BTN_6mencoder tv:// -tv driver=v4l2:norm=NTSC_M:width=720:height=480:outfmt=uyvy:device=/dev/video0:input=0:fps=25:buffersize=16:alsa:amode=1:forcechan=2:audiorate=48000:adevice=plughw.1,0:forceaudio:immediatemode=0...

Project 13
Instructions from Project 13
Read the Project 13 - Installation and Setup.pdf to setup an instance of the program of your own and get started trying out Project 13.

Setting up Linux AVR and ARM toolchains
Instructions from Setting up Linux AVR and ARM toolchains
INSTALLING MINT ON A RELUCTANT TOSHIBA SATELLITE LAPTOPDownloaded the latest Linux Mint 16 with Mate image via torrent from linuxmint.org. Burned to DVD and used it to boot the Toshiba. All seemed to be going well untill the boot finished and I tried...

Bench power supply
Instructions from Bench power supply
1) Come up with a simple good idea.2) Add good ideas to it.3) Try to implement it.4) When it fails, start to strip down the design to try to get it to work.5) Strip it down more6) More...7) Rejoyce when something simple works8) Add a few simple things...

Cumulus Wireless Sensor Platform
Instructions from Cumulus Wireless Sensor Platform
Solder the 2 x 22pF Supporting Capacitors for the Crystal Oscillator

Cumulus Wireless Sensor Platform
Instructions from Cumulus Wireless Sensor Platform
Solder the 3 x 220 Ohm Resistors (the 3 resistor spots nearest to the Crystal Oscillator)

Cumulus Wireless Sensor Platform
Instructions from Cumulus Wireless Sensor Platform
Solder 3 x 3mm LEDs (Top is Yellow, Bottom Left is Red, Bottom Right is Green)

Cumulus Wireless Sensor Platform
Instructions from Cumulus Wireless Sensor Platform
Connect the bottom-center + and - connection terminals to a 3V power source (CR3023 Battery, 2 x AA Battery, ..)

Getting started
Instructions from Projector Screen
Get and keep everything clean, including the back of your fabric. When you roll up the screen, the back touches the front, and any dirt will transfer right into the middle of your new screen. Take the actuator arm off the wiper motor. See what the threads...

Sci-fi grade Home Automation
Instructions from Sci-fi grade Home Automation
For the outlet power detectors:Cut the connectors off of your two wall warts and solder the grounds together (and to the ground on their Arduino)Solder the +5v wire of one wall wart to the +5v plug on the Spark core, and the other to digital input 3...

TI Launchpad Arcade Control to USB Interface
Instructions from TI Launchpad Arcade Control to USB Interface
Launchpad-Mame-Control TI Tiva C Launchpad firmware for Mame USB arcade controls adapterThis project is intended to design firmware for the TI Tiva C Launchpad development board to enable it to be used as a USB gamepad/mouse adapter for arcade and other...

1
2
3
4
5
>
>|