943 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

Soldering the PCB and putting everything together
Instructions from SMS Garage Alert system using an Ultrasonic sensor
The next step included soldering both headers to a circuit board. I had to use a PCB to make sure, that the Ultrasonic sensor fits into the distribution box. Originally I've wanted to use a breadboard instead, but that didn't work out. Personally I had...

LED Control Module
Instructions from Nemo 2
Behaviour The LED Control Module (LCM) drives an RGB LED using different colors and blinking patterns indicating the system state. Green blinking: Starting. This state is displayed until Volumio is completely operational. Green steady: Started. Normal...

Key Codes
Instructions from Pico KeyPad
""" `adafruit_hid.keycode.Keycode` ==================================================== * Author(s): Scott Shawcroft, Dan Halbert """ """USB HID Keycode constants. This list is modeled after the names for USB keycodes defined in https://usb.org/sites/default/files/hut1_21_0.pdf......

Smile Station
Instructions from Smile Station
Well in this step I will focus on the code and getting it to work with Facebook and Flickr ....---------------------------------------------------------------------------------------------------------#!/usr/bin/env python# this file is run using this...

DIY Hot Air Solder Pencil Iron
Instructions from DIY Hot Air Solder Pencil Iron
This is quite simple, first you use the Hi temp silicone to seal the metal to plastic junction of the iron. Leave that to set overnight.Cut off about an inch of the 3mm brass tubing, try not to pinch it closed. If you do use the soldering iron...

CanSat - Exchangeable Payloads Arduino And Edison
Instructions from CanSat - Exchangeable Payloads Arduino And Edison
Step 3: C&DH (Fly Computer)The C&DH subsystem have 2 variants:1.- The Arduino pro Mini 3.3 8 Mhz Atmel328 based fly computer.2.- The Intel Edison based fly computer.The first one is finished and proved, work well but have a really low power of processing...

Floating, Bamboo Makerspace
Instructions from Floating, Bamboo Makerspace
Materials and BudgetWe built a WHOLE LABORATORY out there, so there are tons of different materials. In terms of building the main structure, though, we put it all together with just a few simple ingredients: Bamboo (Kawayan Tinik) We got our bamboo...

Populate the PCB
Instructions from Feeding Experimentation Device 3 (FED3)
Start by soldering on all SIX headers. These include two short female headers for the Adalogger (one 12 pin, one 16 pin), a short female header for the RTC module (5 pin), and two short female headers for the TB6612 motor driver (one 10 pin, one...

Setting up an alarm
Instructions from Health monitor - Waylay IO
Alarms are a useful function through which you can get notified when the monitored values reach unwanted levels. Select the Templates field from your user console and click on the Add Template button.To create a basic alarm flow,...

Connect Mobile Phone
Instructions from Ameba Arduino: BLE – BLE Battery Service
On your mobile phone, open the Bluetooth app and scan for the Bluetooth signal broadcast by Ameba, it should appear as a device named “AMEBA_BLE_DEV”. Connect to the Ameba Bluetooth device, and a list of available services should appear....

STEP 1: DOWNLOAD AND PRINT ALL STL PARTS OF THE ASSEMBLY
Instructions from 3D PRINTED PORTABLE WIND TURBINE
In this video I show you a summary of how I executed the steps for the construction of the WINDTURER-P4 PrototypeInstructions and Materials List for Prototype 1 can be found herehttps://www.instructables.com/HOW-TO-MAKE-a-PORTABLE-WIND-TURBINE/ You can...

#0 Assembly: harnesses
Instructions from E-TKT: anachronic label maker
In this first step, we will prepare several parts that will be used through all the assembly, interacting with multiple subgroups. Hall sensor breakout if the breakout has a male header, remove it first with care;solder a 3x pin female 2.54mm header...

SimplePetPot
Instructions from Pet Pot
To begin coding SimplePetPot with the Mind+ software, please follow these detailed steps: Visit the Mind+ download page at https://mindplus.cc/download-en.html.Download the Mind+ software for your computer's operating system (Windows, macOS, Linux)...

Arduino Teletype
Instructions from Arduino Teletype
#include//Baudot lookup tableunsigned char lookup[] = { ' ', 'E', ' ', 'A', ' ', 'S', 'I', 'U', '\n', 'D', 'R', 'J', 'N', 'F', 'C', 'K', 'T', 'Z', 'L', 'W', 'H', 'Y', 'P', 'Q', 'O', 'B', 'G', 0, 'M', 'X', 'V', 0, ' ', '3', '\n', '-', ' ', '`', '8', '7',...

Pallette
Instructions from Pallette
http://website.palette.io.s3-website-us-east-1.amazonaws.com/reflow.htmlReflow SolderingIf you have the PCBs assembled by an external PCB assembler, you can skip this step and go straight ahead to the next step. But if you want to reflow solder the Pallette...

|<
<
59
60
61
62
63
>
>|