Close

268 Results for "3D%20printing"

  • Build the spool
  • Instructions     from Nuclear Magnetic Resonance for Everyone
  • The dimensions of the spool are not critical. Larger or smaller spools should work similarly. An exact wire length is not important. Coils with more layers might perform better. This spool was designed to be as minimal as possible, to make it easy to...

  • Otto DIY
  • Instructions     from Otto DIY
  • Step 5: Fix Servos to Body Take the other 2 micro servos put them in the defined locations in the 3D printed body and fix them only with the pointed screws.

  • Sourcing of components
  • Instructions     from Fl'Air
  • We prepared the Bill of Material basis the components required as per the 3D model. We sourced the wheels as per the following dimensions: Rear Wheels – 2 Wheels with Air tube each of size 20 inches Front Wheel – 1 Wheel of 8 inches MS seamless pipes...

  • Introduction
  • Instructions     from LoRaWAN using Dragino Gateway and TheThingsNetwork
  • Hey, what's up, Guys! Akarsh here from CETech. In some of my previous projects, I was regularly using LoRa modules and came across a lot of advantages and applications of LoRa modules which I showcased in those projects. In this project, I am going to...

  • Supplies
  • Instructions     from DIY $3 Single Chip Macro Keypad From Scratch
  • You will need the following supplies to make its macrokeyCustom PCB3D Printed base (for mounting the PCB at a tilted angle)4 M2 x 5 screwsCH552G E8051 Arduino IDE programmable MCUMode switchSMT buttonMini USB port7 x 0805 10k Ohm SMT resistors2 x 0805...

  • The Light Clock
  • Instructions     from The Light Clock
  • Step 5: Give it shapeOK, so you have a long strand of LEDS connected to amicro-processor. It might be pretty, but it sure isn’t a clock yet! For that you’ll have to build a body.I’ve uploaded a 3D print to thingiverse which you can download. You may...

  • Assembling the Scale - Pt2
  • Instructions     from DIY Wi-Fi Smart Scale (with ESP8266)
  • Once 3D printed parts and wood panels were ready, it was time to assemble the structure. The following steps were taken: 1. Installed the load cells on the first wooden pannel. I used for screws for each. 2. A hole was made on the wooden panel right...

  • Build the control box
  • Instructions     from Nuclear Magnetic Resonance for Everyone
  • Any of the components for the control box can be exchanged for another part. The Behringer sound interface has an input port for 1/4" connectors as well as XLR. A three state (on1,off,on2) switch is recommended as the off state is often useful for...

  • Servo Motors Assembly
  • Instructions     from BrailleBot
  • After completing the previous step, follow these instructions to assemble the servo motors into the Top 3D printed part: Begin by removing all the arms from the servo motors.Screw each servo motor into its corresponding position on the Top 3D printed...

  • POST STROKE SPASTICITY REHAB HELPER

  • Instructions     from ReHubJr Rehabilitation Helper
  • Bill of Materials We use in the project the components No Q Name Description 1 2 Controller Arduino nano R3  2 6 Tenzo Bridge Pressure Sensor Scale Module 3 6 ADC fo Tenzo Bridge HX-711 4 12 Servo mini SG90 Servo mini SG90 9g Tower Pro 5 0 Blue...

  • Gather materials
  • Instructions     from Controller Input Adapter
  • You will need the following (prices as of 7/24/2022): 1 Arduino Zero $47.40 https://store-usa.arduino.cc/products/arduino-zero 1 Tundra Labs HDK $149.99 https://tundra-labs.com/products/steamvr-tracking-general-purpose-hdk-reference-design-tl448k6d-gp-hdk?variant=39421903536337...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday