Wearable Endgame Arc Reactor Wireless Charger

Back to overview

3d printed movie accurate arc reactor with modular cores allowing for movie accurate lights and the ability to charge a phone wirelessly.

don-juan-de-pyro

Don Juan De Pyro

1

Instructions for building the main system

To build the basic body I have an Instructable . I'll be updating how to do the whole wireless charger part here and as a separate Instructable and YouTube video.

https://www.instructables.com/id/3d-Printed-Endgame-Arc-Reactor-Movie-Accurate-and-/

You'll need 3mm leds that are cool white which will need to be sanded down to 1.85 mm in thickness to superglue into the diffuser slots. I currently have them wired to a resistor and 9v battery but plan to change that to one of the plugs on the lipo charger pack I have to hook the wireless changer to. That will make it so I don't have to wear a shirt with a hole in it to get this thing all powered.

I'll keep adding instructions here as I go.
2

Step 2

Discussions

ono wrote 03/01/2022 at 19:20

Nice project ! Will you post a finished walkthrough of the whole assembly/making ? That would be awesome and we could give you feedback

Are you sure? yes | no

TANGBIN-211 wrote 10/13/2020 at 13:21

GOOD

Are you sure? yes | no