524 Results for "강남권룸싸롱【θ1θ↔4⑥48↔0⑨30】xavi서울룸싸롱±선릉추천업소￡역삼풀싸롱ksubi강남룸접대paul서초풀싸롱σ강남추천업소θ선릉풀싸롱δ"

Controller hardware
Instructions from VSTiBox
The controller PCB's contain a lot of SMD components, but soldering by hand is do-able. It is best to start with the hardest part: the LPC1114. I use a technique to solder all the pins with a thick layer of tin. Then I hold the PCB at an angle of about...

Creating the wires to connect the sensor with the D1 Mini
Instructions from SMS Garage Alert system using an Ultrasonic sensor
The D1 mini is a cheap microcontroller with a wifi module. It's possible to connect the board with my home Wifi, if I place it next to one of the windows of my garage. The connected Ultrasonic sensor itself has to be placed in front of the garage door...

PiFox
Instructions from PiFox
Menu optionsInput a number and press enter to access menu option.0 Run fox scriptStarts transmission1 Load default settingsLoads the default settings but asks user to input their callsign and a message.2 Edit current settingsThis takes full advantage...

Coding Arduino to Control Seven Segment Display
Instructions from Seven Segment Display with Arduino and 74HC595
In this step, we will code the Arduino UNO to display different digits on the Seven Segment Display. The steps for it are as follows:- 1) Connect Arduino Uno to your PC. 2) Head over to the Github repository of this project from here. 3) In the repository...

Attention: Adjust settings
Instructions from Monsterrhino printer car
If you have a different length of the rails, different tires, the motor mounted differently or a different gear ratio on the axis you have to adjust some parameters: Change the following lines in User_Function1 in the function Homing3and4 to adjust the...

Power on/off
Instructions from uMyo - wearable EMG sensor with wet/dry electrodes
1. Before turning on, you need to attach the battery to the uMyo: You can use a battery with a JST connector cable (links to suitable ones can be found above);You can also solder any lipo battery directly to BAT+ and BAT- pads on uMyo;Always use only...

DigiPclock - a Digital Pocket Clock
Instructions from DigiPclock - a Digital Pocket Clock
Hello everyone! In this smart watch era, where people are forgetting about old watches, I decided to create a watch that is both digital and has a vintage look. So I created digiPclock. Buy this digiPclock from Tindie Store. By the way, subscribe to...

Uploading the code
Instructions from Arduino Controlled Safe (Locker)
*** FIRST DOWNLOAD AND INSTALL THE PASSWORD AND KEYPAD LIBRARIES *** JUST EXTRACT THEM IN ARDUINO LIBRARIES FOLDER Install the above mentioned two libraries. You can download them directly from the library manager or you can download the zip file and...

Putting it all together
Instructions from ESP8266 Lua Tutorial, Part 3
I will be using GPIO5 and GPIO4 to communicate with the DS18B20 and the DHT22. These are NodeMCU pins 1 and 2 respectively. I will also be using the on-board LEDs on GPIO0 and GPIO2, which are NodeMCU pins 3 and 4. We also need to declare variables...

Final Assembly
Instructions from Cluster Pi - Yet Another Pi Cluster Project
Once I've verified that all the Pis boot and run and that I can now SSH into them, it's time to batten down the hatches. First, I figure out the final routing of the power and SSD USB cables. Zip ties on the power cables help to keep...

Programming
Instructions from Sound Processing Shield for Arduino
Eventually this step will include Python code for setting up and controlling this Shield, or at least instructions on modifying it for your own purposes (with the full code going into the Files section). Until that's ready (or close to it), this spot...

Portable travel NAS
Instructions from Portable travel NAS
Let's get cracking, get the Carambola up and running. I like to connect to the serial terminal, the development board features a usb ftdi chip allowing me to use a terminal program like PuTTy to connect.Connecting to serial terminalFirst step: see that...

sdramThingZero - 133MS/s 32-bit Logic Analyzer
Instructions from sdramThingZero - 133MS/s 32-bit Logic Analyzer
Select a DIMM:SDRAM (PC-66, PC100, PC133...). Preferably SINGLE-SIDED (for this prototype)Double-sided DIMMs will only have half their memory available to this sdramThingZero prototypeSorry, DDR++ support is a long ways off (if at all).SODIMMs (from...

Compile software and upload MP3 files
Instructions from Put n Play Cube
Extract the content of the firmware zip file to your Arduino sketch folder. In the user settings section of the MusicCube.ino you can change some values to adapt the behaviors of the Put'n'Play Cube. // -- user settings ------------- #define INIT_VOL...

Configuring the Bluetooth Low Energy Module
Instructions from The UnbreakaBLE Micro Drone
The bluetooth module used in this project is a HM-11. A stock module will have a default name of "HMSoft" and a default password of "000000". In addition, it will be configured with a 9600 baud rate, and only 0 dBm.These are all characteristics we need...

|<
<
4
5
6
7
8
>
>|