Close

857 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EA%B2%AC%EC%A0%81%E3%82%88%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8ago%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8eighty%20%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%CE%BA%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%E2%92%B2%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EF%BD%83%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8literary"

  • AM2XBee4RC
  • Instructions     from AM2XBee4RC
  • Mount your hardware and solder the appropriate wires from your ADC pads, GPIO pads and other components together. Each build will most certainly be unique so use your discretion as to which component attaches to which Arduino pin. I used the following...

  • Pedal Wiring
  • Instructions     from Pedalino™
  • Pedalino is designed to work with the majority of expression pedals on the market, but there are a few popular pedal types which are incompatible and need to use adapters in order to work with Pedalino. There is no recognized standard for footswitch...

  • Prep Your Board!
  • Instructions     from Sotto: A Silent One-Handed Modular Keyset
  • Cut your protoboard to roughly fit the size of the Feather. Use your wires to take the inconveniently placed pins and turn them into tidy little rows of four. The rows should be: A0   3v   Gnd   11 A1    3v ...

  • Cree Dimming Level
  • Instructions     from Cree Dimming Level
  • Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

  • Connections

  • Instructions     from TRICORDUINO - 3.0 True Scientific Tricorder
  • You can find every information about Feather MO Adalogger in: https://learn.adafruit.com/adafruit-feather-m0-adalogger/overview I have used all pins of Feather and I would like to have more pins available. These are the connections of the set: Pin00-...

  • Run a Program
  • Instructions     from Analog Speedometer Using Arduino and IR Sensor
  • #includeLiquidCrystal lcd(A5,A4,A3,A2,A1,A0);#include const int stepsPerRevolution = 200; // change this to fit the number of steps per revolutionStepper myStepper(stepsPerRevolution, 8, 9, 10, 11);volatile byte REV; unsigned long int rpm,RPM;unsigned...

  • Wire
  • Instructions     from Hybrid Sim Yoke
  • Wire as follows:  Both potentiometers Pin 1: 5v Both potentiometers Pin 3: ground Left potentiometer Pin 2: A0 Right potentiometer Pin 2: A3. Note that they have two channels, and all three wires have to connect to the same channel...

  • Unruly signals: S.O.S....
  • Instructions     from Open Source LiDAR - Unruly
  • SignalPinPortActionDescriptionRESETNJP4.14External reset control+3V3JP4.13Digital power lineAREFJP4.12Fixed at 3.3VHVIJP4.115V supply for laser and APDLASER_POWERJP4.10A0DACSet laser powerTHRESHOLDJP4.9A1DACComparator thresholdBIAS_VOLTAGEJP4.8A2ADCAPD...

  • Connect to Arduino
  • Instructions     from 4-Channel Optogenetics Pulser
  • Plug the collated ground wires into an Arduino Ground pin, and the collated +5V wires into a +5V pin (if using a Due, use the +3.3V pin or you will damage the microcontroller) and plug the other jumper wires into the correct I/O pins: Toggle switches...

  • Working of an AC
  • Instructions     from Air Conditioner PCB Tutorial With its Working
  • An air conditioner collects hot air from a given space, processes it within itself with the help of a refrigerant, and a bunch of coils and then releases cool air into the same space from where the hot air had originally been collected. This is essentially...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday