2528 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

Arduino or Wemos Code
Instructions from WiFi Signal Strength Scanner Monitor or Checker
In the arduino code set your WiFi credentials char wifissid[] = "ENTER YOUR WiFi SSID HERE"; char wifipass[] = "ENTER YOUR WiFi PASSWORD HERE"; Normally, the signal strength is displayed in dBm. But for a non techie person, the signal strength in terms...

Cree Dimming Level
Instructions from Cree Dimming Level
Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

Create a function to decode the payload
Instructions from 2022 HDP 4 - Climate Resilient Communities
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...

CASUAL
Instructions from CASUAL
Build instructions are located here http://casual-dev.com/2013/10/22/setting-up-for-casual-development-of-casual/

Arduino-Compatible FPGA Shield
Instructions from Arduino-Compatible FPGA Shield
Step 2 - Import the Arduino board file into Altium Designer: Using Altium Designer (AD) requires that I import Eagle board into AD. AD14.x includes an Eagle importer. Used source files from the Arduino site to import in AD.

Arduino-Compatible FPGA Shield
Instructions from Arduino-Compatible FPGA Shield
Step 10 - Figure out breakout schema for IO pins and the various IO ports from the FPGA (i.e. the connections that will enable the FPGA to interact with the world...ex: 'perfboard'-style area, headers, etc.

Free Presidential Style Hotline
Instructions from Free Presidential Style Hotline
Python Code:import serial import subprocess ser = serial.Serial() ser.port = "/dev/ttyACM0" ser.baudrate = 9600 ser.open() value = 0 blinkcount = 10 while 1: p = subprocess.Popen(["linphonecsh", "status", "hook"], stdout=subprocess.PIPE) result = p.communicate()[0]...

Setting up Linux AVR and ARM toolchains
Instructions from Setting up Linux AVR and ARM toolchains
INSTALLING MINT ON A RELUCTANT TOSHIBA SATELLITE LAPTOPDownloaded the latest Linux Mint 16 with Mate image via torrent from linuxmint.org. Burned to DVD and used it to boot the Toshiba. All seemed to be going well untill the boot finished and I tried...

Bench power supply
Instructions from Bench power supply
1) Come up with a simple good idea.2) Add good ideas to it.3) Try to implement it.4) When it fails, start to strip down the design to try to get it to work.5) Strip it down more6) More...7) Rejoyce when something simple works8) Add a few simple things...

Cumulus Wireless Sensor Platform
Instructions from Cumulus Wireless Sensor Platform
Solder the 2 x 22pF Supporting Capacitors for the Crystal Oscillator

Cumulus Wireless Sensor Platform
Instructions from Cumulus Wireless Sensor Platform
Solder the 3 x 220 Ohm Resistors (the 3 resistor spots nearest to the Crystal Oscillator)

Cumulus Wireless Sensor Platform
Instructions from Cumulus Wireless Sensor Platform
Solder 3 x 3mm LEDs (Top is Yellow, Bottom Left is Red, Bottom Right is Green)

Cumulus Wireless Sensor Platform
Instructions from Cumulus Wireless Sensor Platform
Connect the bottom-center + and - connection terminals to a 3V power source (CR3023 Battery, 2 x AA Battery, ..)

Web based solar panel monitoring/managment
Instructions from Web based solar panel monitoring/managment
The project is just a typical bread board project. use what ever techniques your comfortable with. I use a mix of soldering for the voltage and current collectors and use wire wrap to tie those collectors back to the Arduino. One mistake I made that...

Arcade Control Panel
Instructions from Arcade Control Panel
Step 10 - You will likely want to mount some kind of USB extension connector through the back of the frame. Again, the type and style will depend on your control adapter, and if you've made it this far, you should be able to figure that out on...

1
2
3
4
5
>
>|