60 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

Floating, Bamboo Makerspace
Instructions from Floating, Bamboo Makerspace
Tying Wood (Ba'at)Most of the boats are made just by tying things together REALLY TIGHTLY. They call this process "Ba'at" in Visayan.To do this just follow these steps:Get a long piece of nylon cord (or tire rubber, or string)Tie one end around some...

▇▇▇▇ Counting and Dividing ▇▇▇▇
Instructions from FPGA Bootcamp #2
The remainder of the Verilog takes the 12MHz clock and uses it to drive a 16 bit counter. When the counter overflows, another counter increases. When that counter reaches 91, the secondary counter goes to zero. This takes roughly 1/2 second at 12MHz....

Hopper Assembly
Instructions from Bloft Mk2 - 3D printer for plastic waste
Now we start adding the components for the material feeding system. These include the hopper, the hopper inlet and the joint body that connects the hopper with a material reservoir. There will be also a motorized feeding system. Prepare: 6 pcs M3 Square...

Granulate Reservoir Assembly
Instructions from Bloft Mk2 - 3D printer for plastic waste
We will now add a small reservoir for plastic pellets on top of the hopper section. The reservoir has a material level sensor to trigger the dispensing system once the level has dropped below the threshold. Prepare: 3D printed Separator Adapter Plate3D...

Assembling the fermenter
Instructions from An open-source fermenter
Now that you have fabricated each element of the fermenter, it is time to assemble it! Below you will find the assembly strategy. Gather the different elements and bring your Allen key and the bolts and nuts referred to above. Please also refer to the...

Create the base
Instructions from Camperwagon 3.0 - Eljestmobile
The aim for this step is to create a frame to add the wheel base, handle and the slider. To think about in this step: Slider length (750mm in my case)Width of wheelbase screws.Position of wheel and slider fasteners so middle beam and wheelbase screws...

Head Gesture Recognition
Instructions from TV Remote Control based on Head Gestures
Once the system is turned on by an AT switch, the camera starts capturing frames from the user's face/head and the image processing take place through computer vision techniques. The head gesture recognition task is performed by the combination of two...

Affordable Reflectance Transformation Imaging Dome
Instructions from Affordable Reflectance Transformation Imaging Dome
While there are ways you could use the RTI dome by lifting it up and placing it over the object you want to photograph, it makes more sense to have the dome/camera stationary, and have a way to easily swap multiple objects in and out of the system for...

Circuit Assembly
Instructions from Inductive_Dice
Coil Winding The basic assembly process is the same for each side. Create a free end of ~60mm of wire and wrap 200 turns of wire around the central former of the side element, trying to ensure that the windings are tight and evenly spaces. Due to hand...

Part 1: Flow Cell using a PH gradient
Instructions from Bipolar Membrane Energy Harvester
This flow cell generates electricity by differences in electrode potential in manganese dioxide over a PH gradient, like a fuel cell that uses acids and bases instead of oxygen and fuel. This type of technology, albeit probably with different electrode...

Assemble your Printer
Instructions from The Trash Printer - Version 3
You can check out the interactive model for the Trash Printer on the SketchUp 3D viewer, or download it from the SketchUp 3D warehouse. You can use this model as a reference to see how all the parts go together, and you can also use it to modify...

Making an Adapter and Power source for the ESP-01
Instructions from Setup & Update the ESP8266 - Getting Started Guide
Looking at the 01 version we see that it is not very breadboard friendly so we have to make an adapter for programming. You could buy one on ebay for a few cents but waiting one month just for shipping is silly because you can make one in 5 minutes....

Roll Motor
Instructions from Open-Source Shallow Water Glider
Print the ServoRollMotorMount and attach the servo. This section will then attach to the brain housing. The servo can be plugged directly into the PCB. The ServoRollMotorMount print can be attached with square-stock. This unit will then connect to the...

Leg Module
Instructions from Mike's Robot Dog
In one week, for less than $500., we can have a four leg module. To make the module stand and walk, power and control need to be provided and that will add about $100. more in cost (Arduino, battery, switches, voltmeter, wire, connectors). As shown in...

Assembling the Trundlebot
Instructions from Trundlebot - The Educational Robot
First gather all the parts you need. The assembled Trundlebot PCB from aboveRaspberry Pi Pico or compatible2 X 28BYJ stepper motors3D printed parts (2 X “Wheel”, 2 X “Motor Holder” and “Trundlepad” from the files...

|<
<
1
2
3
4
>
>|