Here, the basic module modified to be used as axis X of the plotter. It is exactly the same structure only the size of the rods has been modified and we have exactly those that we needed and keeping strictly background's rules.
We have two modules suitably resized to be used as axi X (red) and axis Y (blue). We needed this two similar structures, and placed it in orthogonal form, that is, his axes displaced 90 degrees one respect the other. In this image we see how we must...
This green piece join the two structures. With the hole for the linear bearing in the bottom part and the space for the corner pieces in the upper part. With four of this green pieces and four linear bearing we can join the two structures and can move...
The complete mechanism. The light blue pieces,the rod,and the magenta pieces, connect de X axis to the belt moved by the motor in the Y axis. In the X axis, the four green pieces form a platform where we will fix the pen holder. The yellow piece joined...
Required Components:The component list for this computer is fairly low as only a single IC is required: 1 x ATmega 1284P Microcontroller 1 x DIL 40 Pin 0.6" IC Holder 1 x 40 Pin Female Pin Header (to be cut down into smaller headers) 1 x 16 MHz Crystal...
Below is a list of build instruction logs that will instruct you on how to go all the way from sourcing your components to printing the parts, and constructing your very own raman spectrometer!To begin, you will need some tools.. Pretty much every...
Section: 6A complete Filter Selector AssemblyComponents Required: Printed versions of the following 3D Printed Objects from the gitHub repository: mechanical_device_filterSelectorAssembly_frontmechanical_device_filterSelectorAssembly_backmechanical_device_filterSelectorAssembly_filterWheelmechanical_device_filterSelectorAssembly_centerHub_Backmechanical_device_filterSelectorAssembly_522nmSP_covermechanical_device_filterSelectorAssembly_550nmSP_cover(1x)...
Section: 7A Completed Spectrometer. A note might be made here that this spectrometer can and will function as an independant device connected to a regular PC running the ramanPi spectraCide software! If you wanted to use it and not build...
5.Program your microcontroller with the following BASCOM code:''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Infrared Remote Control Transmitter for Nikon D90' -------------------------------------------------'' ...
Let's get cracking, get the Carambola up and running. I like to connect to the serial terminal, the development board features a usb ftdi chip allowing me to use a terminal program like PuTTy to connect.Connecting to serial terminalFirst step: see that...
Step 1: Motherboard Assembly and ProgrammingI designed all of the boards to be hand solder friendly, with leadless QFNs all on one side (that can be reflowed). If the other side has components, these are usually larger and easier to hand solder. Step...
http://www.tricorderproject.org/arducorder/chipkit-mplab-ide-0023-arducorder.ziphttp://www.tricorderproject.org/arducorder/chipkit-mplab-ide-0023-arducorder.zipStep 3: Constructing the CaseThis beautiful case is constructed from laser cut acrylic --...
### [ WRITE IMAGE TO SD ]wget "http://93.174.101.10/bt/09bc05ab03780f279390e9cf6a15c7c249f712e1/data/2014-01-07-wheezy-raspbian.zip"7z x 2014-01-07-wheezy-raspbian.zipSD_CARD=/dev/sdX # Change it to your SD card device namemd5sum 2014-01-07-wheezy-raspbian.img...