Close

2305 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

  • B(h)ackpack AP
  • Instructions     from B(h)ackpack AP
  • These directions will only get you as far as I've come. If you have any ideas for step 9, please consider becoming a collaborator for this project.Obtain Raspberry Pi 2 (or better).Install Raspbian.Obtain a powered USB hub to connect the following components...

  • Battery Tutorial for SG circuit
  • Instructions     from Battery Tutorial for SG circuit
  • Greetings fellow Enthusiasts Let me introduce myself. I'm Bones MacGyver. I like to make sparks.I'm going to do my best to help out the community with their battery woes.By no means am I a battery expert. But I have used and abused MANY Ni-Cd cells (and...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • Now that you have gotten some of the parts, and hopefully stocked your parts bins and caused some carnage in the process, we are ready to proceed.  This is the end goal of this hullabaloo:You will wind two large inductors using the cores you salvaged...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • Winding the inductors is easier than you might think!  I used about 4 feet of 18GA Magnet wire to wind the inductors for this particular power supply.  Each inductor has ~30 turns on it for an inductance of about 90uH.  If you don't have...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • Now that the PSU is done, Arguably the most difficult part, the rest is pretty easy.  There are two major components that need to be built now:  The control circuit for the HV psu, and the Hand sensor.These are the last two critical custom...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • First, here is the block diagram:You'll note that there are two relays in this circuit.  These are used to connect the HV output to the hand electrode, and turn on the 12V supply to the Amp and HV power supply.  You can spider wire them in...

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • To get a good idea how we made the electrodes, you can read the project update entitled "The Hand Thingie".  If you want to use the same sensing set up we used, this worked well.  Any sort of Object that is fairly ergonomic and can have the...

  • Animatronic AVP Predator cannon

  • Instructions     from Animatronic AVP Predator cannon
  • Cannon code- #include "Servo.h" // include the servo library Servo armServo; // servo to raise the arm Servo cannonServo; // servo to recoil cannon // these constants won't change: const int triggerSensor = 1; // the sensor is connected to analog pin...

  • Experiment Bioroid!
  • Instructions     from Experiment Bioroid!
  • Neodymium Magnets mountingDrill 2.9mm holesuse 5 magnets for each hole in blue base and hemisphere.glue only the last magnet to hemisphere.  

  • Portable LED Floodlight
  • Instructions     from Portable LED Floodlight
  • Wire up the business end too. A few extra zipties to keep tension strain off the crimp connections.The lights included some stainless brackets and hardware. The light to pole interface I had to get creative.. a few 90º brackets and a hose clamp...

  • Trombino
  • Instructions     from Trombino
  • Use epoxy to glue the tower to the potentiometer casing. If using a wind sensor solder long wires to the V+, GND and OUT pins of the wind sensor. Seat it in the gap it magically fits perfectly into as shown below. Tidy your cables! I pleated mine and...

  • Trombino
  • Instructions     from Trombino
  • For the wind version... Solder parts for the button board onto a small piece of stripboard. The schematic for the layout can be found in the Fritzing file on the projects github repository. Cover the back and sharp edges with Sugru.
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday