Close

345 Results for "%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EB%93%B1%EB%A1%9D%E2%9E%9Coptime4%E3%80%82com%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC %EA%B0%95%EB%82%A8%EB%A7%88%EC%82%AC%EC%A7%80 %E2%9E%9C %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%E1%98%AD %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EB%B0%A9%EB%B2%95%E1%98%AD %EA%B0%95%EB%82%A8%ED%9C%B4%EA%B2%8C%ED%85%94 %EA%B0%95%EB%82%A8%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

  • Cree Dimming Level
  • Instructions     from Cree Dimming Level
  • Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

  • GCODE Commands
  • Instructions     from DIY Inkjet Printer
  • The printer can be controlled by sending values via i2c. Each set bit represents a printer command like: 0 - everything off 1 - single drop printhead 1 2 - single drop printhead 2 4 - single drop printhead 3 8 - single drop printhead 4 16 - drops at...

  • Cabling the MPE device's hardware-components
  • Instructions     from MPE-DIY-Device
  • Power supply: Ground - GND from Teensy (power-rail as described in the PDF attached) +3.3V - 3.3V from Teensy (power-rail as described in the PDF attached) Joystick 1: VRx - Pin 23/A9 (horizontal control) VRy - Pin 22/A8 (vertical control) SW - Pin 01...

  • Joy232
  • Instructions     from Joy232
  • Loading the Hook Code In order to use Joy232 it is necessary to load it on the MSX by either of the methods presented below.Method 1: Copy the file "joy232.bin" to a floppy disk (or an equivalent option like the SD Mapper interface. load and execute...

  • I2C Sensors and debugging
  • Instructions     from Stratux ADSB Receiver and AHRS
  • I wanted to use a BMP280 I had in my parts bin for altitude measurements. I have used it in the past for a simple weather station and it works great! Turns out, it is even the go to sensor for Stratux, so I went ahead and plugged it in, activated it...

  • Pedal Wiring
  • Instructions     from Pedalino™
  • Pedalino is designed to work with the majority of expression pedals on the market, but there are a few popular pedal types which are incompatible and need to use adapters in order to work with Pedalino. There is no recognized standard for footswitch...

  • Resource Monitor
  • Instructions     from Resource Monitor
  • Solder wires from UBBB to LCD. (Note that uBBB pins are ordered as if looking at the bottom, since it also serves as a generic 32-TQFP breakout board if you flip it upside down). Specific connections are described below:-Connect pins 1, 5, and 16 on...

  • Software
  • Instructions     from Mike's Robot Dog
  • Making the dog walk is quite the challenge, so here's my approach. I created a drawing showing "standing" leg positions in black and progressive changes in red. The approach is to: 1) lift the left front and right rear legs 2) move the left front and...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday