Close

56 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • Bored No More
  • Instructions     from Bored No More
  • BrainstormWhat features do I wantI wanted the ideas that failed on my last board to work on this one.  So a big spinning wheel placed behind the board with a cut out window to show different photos was a must.  Another thing that I wanted was...

  • Ansmann POWERline 4 repair
  • Instructions     from Ansmann POWERline 4 repair
  • I'm using the Ansmann POWERline 4 as example, but most of this is applicable to any switch mode power supply repair. I promised to make checking the rectifier bridge my new first step in case of blown fuse, that much is true. However, there's one thing...

  • Solar Water Pump
  • Instructions     from Solar Water Pump
  • The Solar Pump System controller is the brain of the entire project. It basically regulates the current supplied to the pump from the solar panels.The Power IN,L1,L2,L3 and Ground connector terminals are in the controller.Most Solar Pump System Controllers...

  • DIY MIDI FIGHTER
  • Instructions     from DIY MIDI FIGHTER
  • Yay! You made it to the second step! In this step we will solder all the components and connect them to the Brain Jr.For this step you will need:A soldering ironSolderA wire stripper16 Arcade buttonsWires1. Strip the wiresStrip the wires.2. Put the buttons...

  • Live Wire - ESP8266+Envi
  • Instructions     from Live Wire - ESP8266+Envi
  • The serial port was showing lots of errors - almost no error-free lines received. So I spent parts of a few days blaming bad soldering, ground problems, EMI, flaky cable, etc., but couldn't explain why the original chip still worked and the new chip...

  • Dtto - Explorer Modular Robot
  • Instructions     from Dtto - Explorer Modular Robot
  • We need:- 1 x Arduino Nano v3.0The Arduino Nano is the brain of our module, our robot. It is very important we test our Arduino before we proceed to do the following steps. Sometimes we buy not official Arduino Boards, so we have to ensure that we can...

  • Mind Controlled Robot
  • Instructions     from Mind Controlled Robot
  • Use a Knife to destroy the connections from these PINs to the Chip inside the RF dongle.This is to ensure that the brain wave signals received from the Mindwave is sent to the Arduino and no the internal chip in the RF dongle

  • Arduino, EEG, and Free Will
  • Instructions     from Arduino, EEG, and Free Will
  • Assembly of the recording device is quite simple. The EMG and EEG signals each come from their respective Arduino shields, both sold by Backyard Brains fully assembled. If you're interested in building everything from scratch, the schematics are online...

  • Barnabas-Bot
  • Instructions     from Barnabas-Bot
  • 2: Assemble the Servo MotorsOverviewServos motors are used to move your robot's two arms and heads. They can move a half circle, or 180 degrees. You will need to make sure that you have the following items before you start your servo motor assembly.3...

  • Barnabas-Bot
  • Instructions     from Barnabas-Bot
  • 1: Wiring Up Your RobotOverviewNow that the body of your robot is built, you now need to wire him up. Wiring is necessary to allow electricity to flow through out your robot's body. In our class we discuss how the battery is like a robot's heart, and...

  • Barnabas-Bot
  • Instructions     from Barnabas-Bot
  • 1: Getting Started with ProgrammingOverviewRobots, just like us, need to know what to do! We have put our robot's body as well as heart system together. We even connected our brain. We need to program our robot, but before we do that, we need to connect...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday