Close

2035 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

  • HandBot
  • Instructions     from HandBot
  • Once the correct reading of the accelerometer is verified, you will need to set values of operation and you are going to insert this code in the visual engine performance code. Operation will be visually checked by the LEDs before connecting to the the...

  • Motorised Z-Table Controller
  • Instructions     from Motorised Z-Table Controller
  • Cut out or have board made.Install 4 x 0805 10K resistors on inputs, add 1 0603 1uF cap , solder in ATTINY 2313, add headers.Switch is optional, doesn't do anything in code yet.Program it! Wire in 5V power and switches, connect PUL to Pulse Input, DIR...

  • Lexitron RSS Reader
  • Instructions     from Lexitron RSS Reader
  • Lexitron circuit design and hardware:LED display: The display is constructed using Red 8x8 square LED matrix displays, each containing 64 LEDs wired in a square grid with the 16 column and row pins available out the base. It is designed to be used in...

  • Lexitron RSS Reader
  • Instructions     from Lexitron RSS Reader
  • Tickernut construction log:Construction was completed in stages over the period of many months with a design that evolved to suit the available parts.  The progression of construction was arranged so that each stage could be completed and tested...

  • Infinity Mirror Clock
  • Instructions     from Infinity Mirror Clock
  • The clock is primarily made up of the following: 2 pieces of 8mm plywood (600mm x 600mm) - needs to be cut as per the schematic above1 piece of 18mm block-board (600mm x 600mm) - needs to be cut as per the schematic above. Please be careful with the...

  • Data Collection Terminal
  • Instructions     from Data Collection Terminal
  • The project is mainly 0805 surface mount, the smallest parts are the FFC (Flat Flex Cable Connectors) which are 0.5mm, you will need to solder a 31 pin one for the GLCD and a 12 pin one for the barcode.If you open the cad files in your browser and look...

  • 1Charger
  • Instructions     from 1Charger
  • Calibrate connected-ish ( serial port )The serial port is useful for making charge curves and debug. I use a usb to serial cable that accept 3.3v level.Connect the serial cable to GND and pin PA7The software UART timer interrupt is also used as a timebase....

  • 3D(ollar) Scanner
  • Instructions     from 3D(ollar) Scanner
  • 8. Take picture using program local to OS: -use GIMP or other program to find pixels and locate coordinates for center of platter-set resolution in the video_line_viewer to the size your camera outputs.. manually :(-determine angle, in radians of platter...

  • 8-bit Jukebox
  • Instructions     from 8-bit Jukebox
  •      Assemble the case: Add a little glue to the edges of each plate (A-1 through A-5) and press fit them together. The arrows and letters on plates A-1 through A-4 should match up as shown in Image 1. You might want to use some...

  • Modular Clock Kit
  • Instructions     from Modular Clock Kit
  • The Clock Logic board is 3.75" x 2.50".The I.C.s are spaced two (2) rows apart.I started on one end with the simple power supply, wave shaper and divide by 60 circuits.Next is the inter-stage logic. The heart of the clock.The various resets, divide by...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday