Close

1385 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EA%B2%AC%EC%A0%81%E3%82%88%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8ago%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8eighty%20%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%CE%BA%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%E2%92%B2%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EF%BD%83%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8literary"

  • Wiring Up the Octosonar
  • Instructions     from HC-SR04 I2C Octopus "octosonar"
  • The connections on the Octosonar are clearly labelled. I'll try and run up a wiring diagram later, but for now the following list of connections should get you there. To connect to Arduino Octosonar PinUno Pin DefaultDescription5V5V5V supply for...

  • rDUINOScope Boiana
  • Instructions     from rDUINOScope Boiana
  • TEP 3 AssembleFor more detailed instructions, please visit the Project Website : http://rduinoscope.co.nf/rDUINO_step3.htmlNow is the time to create the Shield board. A Shield board is a board with pinouts which you stack on top of the ArduinoDUE board.Some...

  • Step 1: 3D printing
  • Instructions     from UltraTower
  • To build a tower you will need to print the 3D parts shown on the left of the image. The "Sensors float" part is optional, print it if you want to use the pH and EC sensors. You will need 12 times the part: "Basket".  You can download the files...

  • Step 1: 3D printing
  • Instructions     from UltraTower 2023
  • To build a tower you will need to print the 3D parts shown on the left of the image. The "Sensors float" part is optional, print it if you want to use the pH and EC sensors. You will need 12 times the part: "Basket".  You can download the files...

  • Header Pins
  • Instructions     from Sig7Seg - controller for mechanical 7 segment
  • Solder on the 3 sets of three pin headers for the i2c address (A0, A1, and A2). You'll need to attach a jumper to each one to pull the pin high or low (chip will not work if these are left floating). The remaining header pins are optional depending...

  • Provisioning the Raspberry Pi
  • Instructions     from GePS
  • Next, you're going to get the SD card ready for booting the operating system on the Raspberry Pi. This begins with copying the official raspbian lite image to the SD card. This is a process that can be done in many ways, and it slightly differs depending...

  • Build and Initial Testing
  • Instructions     from Digital Manometer/CPAP Machine Monitor
  • First prepare all the parts for final assembly. Solder the pins to the Nano board if needed then install the Nano board to the I/O expansion board. Then, attach or solder the jumper wires to the button switch and the buzzer. I used some leftover servo...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday