847 Results for "강남권룸싸롱【θ1θ↔4⑥48↔0⑨30】xavi서울룸싸롱±선릉추천업소￡역삼풀싸롱ksubi강남룸접대paul서초풀싸롱σ강남추천업소θ선릉풀싸롱δ"

Step 4
Instructions from Elephant Holder
Use Scale tool with value 140 to stretch our model on axis X

Step 4
Instructions from DIY Decorative lamp | Home Decor Ideas
Switch back to Perspective mode Rotate molds by Y and X to 90

Step 4
Instructions from Easy Diy Pencil Holder
Scale the middle copy and set values: X: 195Y: 70 Z: 70 Select and isolate middle object from other objects

Step #0 - buy raspberry pi zero
Instructions from OrangePi Zero pulse music server using I2S DAC
Kidding, but for comparison i really did started with that and configured everything i would like to have from this project on '5$' raspberry zero. So here it is What is missing on that images is external usb ethernet card and amp that was used...

Step 4: PCB Fabrication
Instructions from How to Make a Siren Generator
Order PCB: PCBWay Eagle PCB Board Layout: GitHub Printable PDF: GitHub I fabricated the board using the Iron Method. I drilled four mounting holes in each corner with a diameter of 3mm. The PCB size is 3.3cm X 3.3cm .

Step 4: Source Code
Instructions from Arduino Color Picker
Source code is available for free on GitHub: https://github.com/alojzjakob/Arduino-Color-Picker You are more than welcome to improve the code, as the code provided is only the starting point, but works well. This project uses these 2 specific libraries,...

Step 4: Arduino Code
Instructions from IoT Personal NodeMCU ESP12 WiFi Weather Station
!!!! New version ESP8266 library will not work. At this moment only works old version. For example 2.4.2 Board manager ESP8266 - 2.4.2 1. Instal ESP8266 board into Arduino http://esp8266.github.io/Arduino/versions/2.0.0/do... 2.Enter your's Wifi router...

Step 4: The code
Instructions from Build Interactive Bridge Using Minecraft Raspi
We’ll start by writing our python code, first we’ll start by importing a few libraries that we’ll need in order to integrate our code with the Minecraft world. Then, we’ll import the time library, specifically a function called sleep. The sleep function...

Step 4: Code
Instructions from EMT Conduit-Mounted Wind Sensors
Because the wind sensors refresh their output approximately every 0.8 seconds, the Arduino Nano must measure those analog signals either slower or at that same rate. After taking those readings, the Arduino outputs them to a PC/laptop over Serial protocol...

Solder the 4 sensors onto the 4 PCBs
Instructions from Ergonomic handheld mouse / keyboard alternative
The wiring of this step is very simple in theory, but you'll need quite a steady hand & eyes because it requires SMD soldering. These 3-pin DRV5053 sensors simply have a Ground, Positive and Signal pin. To connect 4 of these sensors to the TinyBLE...

1/4 playwood cuts
Instructions from Simple bookcase
For the back cuts, its a single cut and you simply cut 24 inches off the top of the sheet giving you a 4x6 sheet. You will need to trim the width of the plywood to match your shelf width.

4: make clock face
Instructions from ESP and WS2812 based clock
The clock face is made in plexi glass. Diameter 31.4cm (1m led strip / pi - 2 x 2mm thickness of led strip) The numbers was written on computer font size 96 and font size 120 for 12,3 ,6 and 9. I put the print out under the plexi glass and used...

Blynk App #4 - Joystick
Instructions from Wi-Fi Controlled Robot Using Blynk App
In this app I used a single joystick to control the robot. The speed of each track is defined deppending on x and y positions of the joystick. This way, it's possible to apply different speeds on each track, and move the robot with different speed/directions....

Step 4: Create Rectangles
Instructions from Design an 8 Bit Star Tree Topper in Fusion 360
Go to Sketch - Create Sketch and select the XY plane (red, green). Then choose Sketch - Rectangle - 2 Point Rectangle. We are going to use the rectangle tool to trace the first grid on the bottom left. Left click and release to place the...

Step 4 - Code
Instructions from Telescoping Pole Extension Sensing - Photoresistor
The Arduino Nano runs a code that continuously takes measurements from the 2 x photoresistors, and outputs that data to a PC over Serial protocol via a USB-mini cable. The PC runs a Python script that records the Arduino's output data. Alternatively,...

1
2
3
4
5
>
>|