1556 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ《〈 문의 OIO↗5793↗7458 》〉㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

Hardware
Instructions from CNC pen plotter
The assembly process is quite straightforward: Assembly the pulleys and pulley holders (3 in total).Assembly the pulleys, the motors and the motor holders (3 in total).Assembly the X shafts and the X shaft holders (2 in total).Assembly the movable left...

Wiring the matrix (columns)
Instructions from FPGA Blinker
Now, solder 8 wires between C'x and G"x. Calculate the appropriate current limiting resistors values and have them handy (do the calcs and buy them beforehand). Solder the resistors on the borad and use wires to solder the PMOS drains (D'0, ..., D'7)...

Fix Up Down Arrangement
Instructions from Cute Drawing Robot - Servo and Android
1) Now the stand is ready. We want an arrangement to hold the servos and move up and down in the rail. 2) I use a old pen. Cut the pen in to two pieces and insert into the rods, The pen inner dia is more greater than the rod dia. So i insert a straw...

HackPi
Instructions from HackPi
Replace system files (optionally make a backup of your originals beforehand) config.txt, located in /boot sudo mv -f ~/HackPi/config.txt /boot/ modules, located in /etc sudo mv -f ~/HackPi/modules /etc/ rc.local, located in /etc sudo mv -f ~/HackPi/rc.local...

Step 7: Code Works
Instructions from Wall Drawing Robot, Open Source
The robot is based on Arduino code for Arduino Mega 2560 and it is open-source. Not like CNC machine which has X, Y axis perpendicular aligned and we can find x, y co-ordinate of target by tracking traverse distance of X, Y stepper motor. The wall drawing...

Mini Arduino CNC
Instructions from Mini Arduino CNC
PARTS YOU NEED:For this project you will need: 3 x old CD/DVD-Roms 1 x Computer power supply 3 x Easydriver boards 1 x Arduino Uno board3 x Stepper motors2 x pieces of Wood1 x Soldering Iron1 x Soldering WireFew wires 1 x Pen or Small size drill machine...

Modular cartesian machines
Instructions from Modular cartesian machines
The complete mechanism. The light blue pieces,the rod,and the magenta pieces, connect de X axis to the belt moved by the motor in the Y axis. In the X axis, the four green pieces form a platform where we will fix the pen holder. The yellow piece joined...

Mate Actuators & Install Pen. Physcial Assembly done hooray!
Instructions from Mug-O-Matic: A Modular Tiny CNC
Update: S2=X, S3 =y, S4 = Z. (I had to make room for the gripper cable in slot S1)

Step 1: Part List to Prepare
Instructions from Wall Drawing Robot, Open Source
Arduino Mega 2560 x 1pc CNC shield x 1pc Power supply PCB x 1pc SD card module x 1pc Stepper motor (traverse) x 2pcs Gear (for belt) x 2pcs Stepper motor (pen) x 1pc Belt x 2pcs Base x 1set Bolt, nuts (various) SoftwareArduino IDE/ Corel draw/ Microsoft...

Upload firmware to Arduino
Instructions from Mug-O-Matic: A Modular Tiny CNC
Copy the relevant arduino code from the github. https://github.com/mechengineermike/Mug-O-Matic Download the latest Arduino IDE https://www.arduino.cc/en/Main/Software and paste the code from the TinyCNC Github in there. Connect the usb...

Delivery and Installation:
Instructions from Make Wall Art with an iDraw A3 Pen Plotter
It arrived fast and was very well packaged. That was nice to see. It was also almost completely assembled which was great! The parts that I did have to put together were a breeze. There is a video on their website that shows the step-by-step process....

Yet another laser engraver / cutter
Instructions from Yet another laser engraver / cutter
CalibrationCalibrating the X/Y-axis of a plotter or CNC machine is actually quite easy. I did it as described in this video. First i had to know the theoretical steps/mm per axis. To calculate this value I multipliedthe steps/rev. (200 for most NEMA...

Experiments & Expansions
Instructions from Mug-O-Matic: A Modular Tiny CNC
It might surprise you but the Mug-O-Matic in drawing mode has a rectilinear coordinate system. Even though its X axis twists, the work piece is also round so it cancels out and the math is still easy. :) You'll see in my examples that I like...

Final Assembly:
Instructions from THB6064AH-SMT Stepper Motor driver
12. [ ] The big THB6064AH chip: Since this product has a MOS structure, it is sensitive to electrostatic discharge. These ICs are highly sensitive to electrostatic discharge. When handling them, please be careful of electrostatic discharge,...

Configure the XBees
Instructions from GePS
Prepare Label the XBees with tape and marker pen, one "TX" and the other "RX"Plug the "TX" into the XBee USB adapter and connect it to your computer. Depending on the serial terminal client you use, the connection procedure may...

1
2
3
4
5
>
>|