Close

831 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

  • Back Panel
  • Instructions     from Modular Display Clock
  • The components are attached to a baseplate (95(W) x 128(L) mm), which is fitted to the back of the MDE's with M3 X 25mm bolts and 10mm standoffs. Four bolts are fitted through the holes in the Neopixel support board and the standoffs fitted to attach...

  • GCODE Commands
  • Instructions     from DIY Inkjet Printer
  • The printer can be controlled by sending values via i2c. Each set bit represents a printer command like: 0 - everything off 1 - single drop printhead 1 2 - single drop printhead 2 4 - single drop printhead 3 8 - single drop printhead 4 16 - drops at...

  • Clock in a Box
  • Instructions     from Clock in a Box
  • In order to access A4 and A5 of the Arduino, you will need to solder two (2) headers onto the board (at least on my version). I used male right-angle headers to save space.

  • ESP 8266 pin uses and restrictions
  • Instructions     from ESP cookbook
  • Not all ESP 8266's GPIOs are born equal, something I have now and then been banging my head at (and burned some ESPs). Some are hard wired for some use, like SPI clock and data, some wired to functionality like flashing and booting. For now Wemos D1...

  • Smile Station
  • Instructions     from Smile Station
  • Ok I pored the cement in the tube with a blue foam board on the bottom glued to the sides. That seemed to work out well accept I stuck a blue foam board cutout with a hole cut out in it to keep the 2" pvc pipe in place. Bad Idea it moved the PVC pipe...

  • Output Inductor Build
  • Instructions     from 350 Watt True Sine Inverter
  • This instruction is for building the output inductor (two required - L401, L402).  It describes materials and fabrication guidance but assumes the reader has experience assembling magnetics.  Additional information can be found in the magnetics...

  • Raspberry Pi Zero Smart Glass
  • Instructions     from Raspberry Pi Zero Smart Glass
  • On The Raspberry Pi Zero in Terminal and type these commands to install theRTL8723BU Wifi+Bluetooth 4.0 module (should take about 1 hour to compile)First Lets install the Wifi driverspi@raspberrypi:~ $ sudo apt-get install raspberrypi-kernel-headers...

  • ARDUINO CODE
  • Instructions     from SOFT ACTUATOR ORTHOSIS
  • // Libraries #include #include #include #include #include #include #include "Adafruit_AHRS_Mahony.h" #include //MOTOR // Pins for all inputs, keep in mind the PWM defines must be on PWM pins #define STBY D7 #define AIN1 D8 #define AIN2 D9 #define PWMA...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday