Parts 8" of 1 1/2" PVC pipe, a 1 1/2" Cap, a 1 1/2" Union, and a 2 7/8" LEXAN disc. Glue the half of the Union with the O ring on one end the 8" pipe and Cap on the other Now to make LEXAN lens use a drill press with 3 1/8" hole saw (WITHOUT...
Cut a piece of aluminum channel 14 7/8" long. Measuring from the hinge side of the boom, drill a 1/4" hole, centered in the boom, at 11" and another at 13 3/8". Measuring from the hinge side of the boom, drill a hole, centered in the boom,...
The code is next. It's available at my github, I'll just explain a little bit. The timer2 is set to overflow and it's prescaled to 1024. With 32768 Hz clock it overflows every 8 seconds. Then I add 8 secs to the time variable. I've also set INT0...
Reflow.I use a modified toaster oven to reflow NeuroBytes, usually 8 or 12 at a time. It's not perfect; I usually watch the parts through the oven's window and sometimes need to manually extend the cycle to ensure everything reflows properly. I also...
To make the audio files I used and Android application - Text to Speech (STT). The app lets you write text and save as wav file. You can change language, voice speed, pitch etc. After saving the audio files take them to your computer. Then go to...
Power up the Nod servo and command it to be in its default/center position.Re-attach the servo arm as shown below... Actually, the picture wasn't taken with the different parts straight. The servo arm shouldn't be a bit more clockwise to make the 3rd...
Support for Teensy doesn't come standard with Arduino so you have to add it. I'm using Teensy Version 1.55 Macintosh OS Software (10.10 - 12.x)Macintosh OS-X Installer (10.7 - 10.14)Linux Installer (X86 32 bit)Linux Installer (X86 64 bit)Linux...
The 74HC595 has two registers, each with just 8 bits of data. The first one is called the Shift Register. The Shift Register lies deep within the IC circuits, quietly accepting input. Whenever we apply a clock pulse to it two things happen: The bits...
We use ready box (housing) G1168G Gainta. You only need to make a slot for the LED or LCD display.Assembled devise is shown here, with 1 Controller2 24 bit ADC shields3 ...
There you have it. Your 8-Bit Star is ready to be 3D Printed. Depending on how you want to use it, will determine where you insert a hole. For example if you want to hang it as an ornament then place a hole going through the top. If...
For each of the Elevon servos, repeat the same procedure as above, but with a servo arm approximately 9.5mm hole-to-center (3/8 Inch). This length can be a bit longer or shorter, the effect is increasing or decreasing elevon control throw. For servos...
The CAN module comprise of a CAN controller and transceiver which establish the HIGH-LOW field lines for communication.Configure the module to transmit or receive data.Although CAN controller has 114 register which is configured using 8 types of command:1.)RESET:-mcp2515_RESET(){ ...
Get a grip. I used a semi-flexible water pipe for my knife handles because it was in stock nearby and large enough to fit the electronics. Awhile back, I made a handle from polycarbonate, which was pretty BA. The only reason I didn't make ALL my...