Close

962 Results for "%EC%84%A0%EB%A6%89%EC%9C%A0%ED%9D%A5%E3%80%8Eoio_%EF%BC%94%EF%BC%96%EF%BC%94%EF%BC%98_%EF%BC%90%EF%BC%99%EF%BC%93%EF%BC%90%E3%80%8F%C2%B1%EA%B0%95%EB%82%A8%EB%A3%B8%3C %EC%84%A0%EB%A6%89%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%80%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8 %E2%88%81%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8 %E2%88%86%EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5%2B %EC%84%A0%EB%A6%89%EB%A3%B8%EC%8B%B8%EB%A1%B1%3E %EA%B0%95%EB%82%A8%EB%9E%80%EC%A0%9C%EB%A6%AC%E2%88%88 %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8 %E2%88%82%EA%B0%95%EB%82%A8%EB%A3%B8%EC%8B%B8%EB%A1%B1 enough"

  • Step 1: 3D printing
  • Instructions     from UltraTower
  • To build a tower you will need to print the 3D parts shown on the left of the image. The "Sensors float" part is optional, print it if you want to use the pH and EC sensors. You will need 12 times the part: "Basket".  You can download the files...

  • Step 1: 3D printing
  • Instructions     from UltraTower 2023
  • To build a tower you will need to print the 3D parts shown on the left of the image. The "Sensors float" part is optional, print it if you want to use the pH and EC sensors. You will need 12 times the part: "Basket".  You can download the files...

  • Circuit Connection:
  • Instructions     from DIY Arduino Tic Toc Toe Game
  • Connect the push buttons keypad to Arduino Uno as shown in circuit diagram.(R1~A0,R2~A1,R3~A2,R4~A3,C1~A4,C2~A5,C3~Pin 2,C4~Pin 3).Also take a extra push button(Reset Button) and connect to Arduino.(Reset,GND).Connect all the pixel LEDs.(-Ve/GND~GND,+Ve/5V~5V,Data...

  • Connect to Arduino
  • Instructions     from 4-Channel Optogenetics Pulser
  • Plug the collated ground wires into an Arduino Ground pin, and the collated +5V wires into a +5V pin (if using a Due, use the +3.3V pin or you will damage the microcontroller) and plug the other jumper wires into the correct I/O pins: Toggle switches...

  • Program
  • Instructions     from Hybrid Sim Yoke
  • Add the library https://github.com/MHeironimus/ArduinoJoystickLibrary to your Arduino environment. Load the following code onto the Arduino (adapted from the excellent article at https://giovannimedici.wordpress.com/2020/10/11/ch-pro-pedals-gameport-to-usb-adapter/ ):...

  • DIY Data Logger
  • Instructions     from DIY Data Logger
  • Here's the code for the Spark Core. The programming for this is very similar to an Arduino. Once you go to the Spark website and get your Core setup you just click on the BUILD tab, create a new App and paste in the code and it'll upload the code over...

  • Cabling the MPE device's hardware-components
  • Instructions     from MPE-DIY-Device
  • Power supply: Ground - GND from Teensy (power-rail as described in the PDF attached) +3.3V - 3.3V from Teensy (power-rail as described in the PDF attached) Joystick 1: VRx - Pin 23/A9 (horizontal control) VRy - Pin 22/A8 (vertical control) SW - Pin 01...

  • I2C Sensors and debugging
  • Instructions     from Stratux ADSB Receiver and AHRS
  • I wanted to use a BMP280 I had in my parts bin for altitude measurements. I have used it in the past for a simple weather station and it works great! Turns out, it is even the go to sensor for Stratux, so I went ahead and plugged it in, activated it...

  • Header Pins
  • Instructions     from Sig7Seg - controller for mechanical 7 segment
  • Solder on the 3 sets of three pin headers for the i2c address (A0, A1, and A2). You'll need to attach a jumper to each one to pull the pin high or low (chip will not work if these are left floating). The remaining header pins are optional depending...

  • Run a Program
  • Instructions     from Analog Speedometer Using Arduino and IR Sensor
  • #includeLiquidCrystal lcd(A5,A4,A3,A2,A1,A0);#include const int stepsPerRevolution = 200; // change this to fit the number of steps per revolutionStepper myStepper(stepsPerRevolution, 8, 9, 10, 11);volatile byte REV; unsigned long int rpm,RPM;unsigned...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday