Close

2257 Results for "rpd641.top ð Ƽٺм õ ƮĿ ӵ ٸ ͳ"

  • Machining of top plate
  • Instructions     from DIY Vacuum Table for CNC machines
  • When milling the top plate, it is important that some things of the plate are not milled in this step. So, here is a list of things you should mill in this step: Border of the plate, so that you get the correct dimensions.Holes for the dowel pins (holes...

  • Top of Control Box
  • Instructions     from 555 LED Bicycle Indicators
  • Next, push the joystick into the top of the case (you will probably need to remove the switch cap for this, and may need to break off any plastic pieces that stop it from sitting flush on the case). The pins should stick through the bottom just enough...

  • Attach the top lid.
  • Instructions     from $10 Robot!
  • The top lid has a quick release catch, but it helps if you can smooth the parts with a small file.  Now attach the lid by squeezing it into the holes at the rear of the chassis. Next attach the spoiler. Pictures coming soon!

  • Prepare top carriage
  • Instructions     from BrailleRAP DIY Braille embosser
  • Assemble the FEMALE_shape on the TOP_trolley with 2 M3-12 screws,  M3 washers and NYL M3 nuts. Build the belt attachment with 2 M3-20 screws and 2 M3 Nyl nuts. Fix 3 RJ4JP-01-08 with collets.

  • Close the Top Lid
  • Instructions     from DIY Mini UPS for WiFi Router
  • Finally, place the top lid and secure the 4 screws at the corners. I have used 3M x 8mm screws to secure the lid. the counter sinkholes in the enclosure fit perfectly to the screw heads. I used the Allen key to tighten the screws. Never overtighten the...

  • Top and Bottom caps
  • Instructions     from Blinky Ball (RGB)
  • On the main PCB, the top connector goes to the bottom cap PCB and the lower connector goes to the top cap PCB.   This allows for the connector wires to be a little longer and not strain making a sharp turn. (There is an error in the silk screen,...

  • Cut the case - TOP
  • Instructions     from Megadrive PC
  • With the motherboard was fixed on the bottom of the case (using superglued plastic hexnuts/standoffs)  it is time to remove any plastic piece that touches the motherboard preventing the case to close. As before remove the minimum amount of plastic...

  • Making the top
  • Instructions     from Flying saucer clock (and NAS!)
  • For the UFO containing the Raspberry Pi and other NAS components, small push buttons are added to the internal top plate. These buttons can be omitted for a 'slave' saucer that doesn't need these inputs. A transparent lever is added (in all cases) and...

  • No Top Channel Required
  • Instructions     from Mac-O'-Lantern for Halloween
  • As you can see an upper guiding channel isn't needed since the Mac has a flat area at the top to guide the tablet and once the front/back of the case are assembled it tends to hold the tablet against the screen opening.   I used a "hack" sawed...

  • #7 Assembly: top
  • Instructions     from E-TKT: anachronic label maker
  • Top + display     place the OLED display into the craddle, with the wires to the outmost part of the J_top piece;cover it with the K_top_screenholder;progressively tighten each of the 2x m3x6mm screws to make sure the screen is flat (check...

  • Build the Internal Case Top
  • Instructions     from SOLAR DISPLAY CASE v2.0
  • Build the Interior top to the case that will protect the battery and components from the elements when in use. My design will include a platform to place a laptop on top of, once again leaving enough room for the monitors and panels to fold on top of...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday