Close

402 Results for "%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EB%8D%94%ED%82%B9%E2%81%B4 %E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EC%B4%88%EC%9B%90%EC%9D%98%EC%A7%91noise%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4%EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5%EA%B0%95%EB%82%A8%EC%B4%88%EC%9B%90%EC%9D%98%EC%A7%91control %EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4 %E2%84%83%C3%9E%EA%B0%95%EB%82%A8%EC%8B%9D%EC%8A%A4contrived"

  • July 7, 2023
  • Instructions     from Geopolymer experiments
  • Begin with 200ml filtered water from the fridge tap, carried in an empty coffee pot. Using 4-6 ratio to calculate. 10x20 = 200ml H2O 4 grams sodium hydroxide x20 = 80 grams NaOH 6 grams silica x20 = 120 grams Unfortunately we only have 92.8 grams of...

  • Sigma Derby Clone
  • Instructions     from Sigma Derby Clone
  • Program the betting station)The betting station needs to know the odds of the current race to know what to pay out if you win. It also needs to know the race winner.Once again this is the fun version, so there is no code here for coin in, or cash out.#include...

  • Provisioning the Raspberry Pi
  • Instructions     from GePS
  • Next, you're going to get the SD card ready for booting the operating system on the Raspberry Pi. This begins with copying the official raspbian lite image to the SD card. This is a process that can be done in many ways, and it slightly differs depending...

  • Configure LoRa device
  • Instructions     from Soil moisture sensor with LoRa
  • In HTerm or any other terminal program you see the start of the module after plugging the power supply jumper.Now you can configure the SMT100 by entering the password in HTerm (123456) and then send AT commands (Attention: Always capitalize commands...

  • Joy232
  • Instructions     from Joy232
  • Loading the Hook Code In order to use Joy232 it is necessary to load it on the MSX by either of the methods presented below.Method 1: Copy the file "joy232.bin" to a floppy disk (or an equivalent option like the SD Mapper interface. load and execute...

  • PCB Design
  • Instructions     from Power Monitoring for your Mobile Home
  • The PCB design is really just a motherboard to link the various breakout boards I used to the ESP-32 wroom dev board I used.  The PCB is powered by by the electrical hook-up and comes on everytime the hook-up is connected and powered up. For this...

  • Crazy Clock
  • Instructions     from Crazy Clock
  • Obtain a clock movement or remove the one from the clock you intend to modify. The recommended clock movement if you wish to start with a fresh one is the Quartex Q-80, available from Klockit. It's also the movement being used (at least at present) by...

  • Step 13
  • Instructions     from Easy Diy Pencil Holder
  • Choose one object. Use Move tool to transfer it to center and set value 80 on Z axis, also transfer to center another object
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday