Close

962 Results for "%EC%84%A0%EB%A6%89%EC%9C%A0%ED%9D%A5%E3%80%8Eoio_%EF%BC%94%EF%BC%96%EF%BC%94%EF%BC%98_%EF%BC%90%EF%BC%99%EF%BC%93%EF%BC%90%E3%80%8F%C2%B1%EA%B0%95%EB%82%A8%EB%A3%B8%3C %EC%84%A0%EB%A6%89%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%80%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8 %E2%88%81%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8 %E2%88%86%EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5%2B %EC%84%A0%EB%A6%89%EB%A3%B8%EC%8B%B8%EB%A1%B1%3E %EA%B0%95%EB%82%A8%EB%9E%80%EC%A0%9C%EB%A6%AC%E2%88%88 %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8 %E2%88%82%EA%B0%95%EB%82%A8%EB%A3%B8%EC%8B%B8%EB%A1%B1 enough"

  • Run a Program
  • Instructions     from IoT Digital Thermometer using LM35 and NodeMCU
  • #include const char* ssid = "*********"; // Your ssid const char* password = "***********"; // Your Password float temp_celsius = 0; float temp_fahrenheit = 0; WiFiServer server(80); void setup() { Serial.begin(115200); pinMode(A0, INPUT); Serial.println();...

  • Run a Program
  • Instructions     from Digital Ammeter Using Arduino
  • #includeLiquidCrystal lcd (7,8,9,10,11,12); void setup() {// put your setup code here, to run once:Serial.begin(9600);lcd.begin(16,2);lcd.clear();} void loop() {// put your main code here, to run repeatedly:int voltage_value0 = analogRead(A0);int voltage_value1...

  • Understanding how to disconnect the speaker
  • Instructions     from Hush Owlet
  • moThe big black device in the middle of the printed circuit board (PCB) is the speaker (aka buzzer, or transducer). You can see a little slit in the one side where the sound comes out. There is a back side to the circuit board that you cannot easily...

  • rDUINOScope Boiana
  • Instructions     from rDUINOScope Boiana
  • TEP 3 AssembleFor more detailed instructions, please visit the Project Website : http://rduinoscope.co.nf/rDUINO_step3.htmlNow is the time to create the Shield board. A Shield board is a board with pinouts which you stack on top of the ArduinoDUE board.Some...

  • Soldering the CPU
  • Instructions     from 68020 minimal homebrew computer
  • Start by soldering the CPU; it can be done with a regular soldering iron. Refer to the internet for guidance on soldering this SMD component (SMD soldering tutorial). The trick is to use flux (and very little tin). For me, this was the first time I soldered...

  • Program the Microcontroller
  • Instructions     from Fear the Scary Cat!
  • Before mounting the prototype PCB to the housing, I recommend uploading the required sketch to the ATtiny84 microcontroller with a programmer of your choice. I used a USBtinyISP type shown in the picture. /*Sketch for the Scary Cat Project by Gene H*/...

  • Counting Muscle Impulses
  • Instructions     from Counting Muscle Impulses
  • Attach the SpikerShield to an ArduinoThe output of the SpikerShield is an analog value between 0 and 5 volts. It is connected to one of the Arduino's analog inputs. There is a jumper on the shield to determine which one. I keep mine on A0.

  • LinkTrucker
  • Instructions     from LinkTrucker
  • Solder the +V pin from the Green LED on the RJ45 Ethernet connector.Connect this to A0 on the UNOYes - there IS possibly a way to do this in software, but I am a hardware hacker and this works great!

  • Run a Program
  • Instructions     from Clap Switch with the help of Arduino
  • const int analogInPin = A0; // Analog input pin 0int sensorValue = 0; void setup() { DDRD = 0xFF;} void loop() { sensorValue = analogRead(analogInPin); //read ADC value on channel 0 if(sensorValue>60) { PORTD ^=(1<
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday