Close

103 Results for "청주오피강추➦www,optime4.com청주오피 청주마사지 ➦ 청주오피ᙕ 청주오피안내ᙕ 청주휴게텔 청주키스방 타임"

  • Remote temperature monitor

  • Configure Raspberry Pi:1. Load GPIO and DS18B20 modules at boot: Add w1-gpio and w1-therm to /etc/modules2. Install python libs for gpio:sudo apt-get install python-rpi.gpio3. Copy python scripts and web pages:https://github.com/james7780/TempMonitortest.py...
  • PolaPi v2.0

  • 4D Systems 4DPi-35 installationdo not attach the display yet, install kernel first then shutdown the Pi and attach it.wget http://www.4dsystems.com.au/downloads/4 DPi/All/4d-hats_4-4-21_v1.0.tar.gz sudo tar -xzvf 4d-hats_4-4-21_v1.0.tar.gz -C / sudo...
  • Lid design, part 1

  • I wanted a design where the push button would sit in a recess in the centre of the lid, just for the aesthetic. The idea was there would be very little gap between the button top and the surface of the lidto make it feel more like an arcade button. Since...
  • Configure your web server

  • Install a web server and enable PHP support. I used a Raspberry Pi and Lighttpd for my web server.  If one plans to go the same route, here's the commands to enter on the terminal:apt-get install lighttpd php-cgi lighty-enable-mod fastcgi lighty-enable-mod...
  • The Software

  • Starting at this step, I am assuming there is already a Raspberry PI loaded with an operating system and the PI is connected to WIFI. I am using “NOOBS” and WinSCP to load files to the PI. You will also need access to the terminal and VNC....
  • Upload and Compile

  • Click on the “Compile” button. Note: This step could be skipped. However, compiling is essential for debugging purposes. Connect the display to the PC. Make sure that you are connected to the right port. Red Button indicates that the...
  • Start Printing!

  • Get your prints started! If you don't have a 3D printer, you can always take advantage of awesome services like 3dhubs and fictiv. Download your stl files here! You'll need 5 holders, 5 covers, 1 base plate, 1 "scale 100", 1 "scale 75", and 5 "scale...
  • Compile and Upload

  • Click on the “Compile” button.Note: This step could be skipped. However, compiling is essential for debugging purposes.Connect the display to the PC. Make sure that you are connected to the right port. Red Button indicates that the...